Topic: 1.32 is Final (Read 13717 times)

jason1722x · « **on:** July 20, 2009, 07:04:47 PM »

The journey continues.

Firmware: 1.32NA
Date: 07/20/09

1. Fix when disable DHCP server and enable DHCP server, LAN PC cannot get IP.
2. Fix using wireless client to configure Access Control rules, cause DUT reboot.
3. Fix UPnP bug.
4. Disable CAPTCHA by default
5. Fixed QRS issue, can't set up wireless setting.
6. Fixed Router DHCP IP range issue.
7. Fixed WPS UI Show Error warning message.
8. Fix potential security leak with CAPTCHA.
9. Fix USB LED issue about Shareport.
10.Fix Shareport HP932C with Wins 7 issue
11. Fix if set more than 8 Trigger or Firewall port in Application Rules. It will show Warning message.
12. Fix bug: When QRS set wan type of rt to DHCP, the rt will not set Primary and second DNS.

Note: This firmware does not allow downgrading to pre-1.3x.

ftp://ftp.dlink.com/Gateway/dir655/Firmware/

R3XNebular · « **Reply #1 on:** July 20, 2009, 08:37:53 PM »

Does this fix the annoying shareport issue, because if it does it will be good timing... uni starts soon

if not goodbye dlink

R3XNebular · « **Reply #2 on:** July 20, 2009, 08:57:22 PM »

1.32NA, 2009/07/09

I updated it says differently for its date

neok · « **Reply #3 on:** July 21, 2009, 01:29:17 AM »

Flash.

Solved those problem but caused my router to lost connection intermittently.

My HW ver A3

cdvision · « **Reply #4 on:** July 21, 2009, 01:40:16 AM »

My HP printer finally works over the shareport.

Now if I can get my PS3 to connect over the LAN (currently it will only connect via wireless) I'd really be smiling. I'll try it tomorrow.

R3XNebular · « **Reply #5 on:** July 21, 2009, 04:21:35 AM »

Nope even 1.32 final still has issues. It stays connected for a few seconds then goes back to appearing as "available" for shareport.

Looks like its time to look for a new router

jason1722x · « **Reply #6 on:** July 21, 2009, 04:58:23 AM »

Quote from: R3XNebular on July 21, 2009, 04:21:35 AM

Nope even 1.32 final still has issues. It stays connected for a few seconds then goes back to appearing as "available" for shareport.

Looks like its time to look for a new router

from Ru_Fi_Oh
"Well judging by the feedback here 1.32 build 03 is more reliable and stable. Yes shareport still has issues and we're working on hammering those issues out.

Being that 1.31 is the latest official firmware and is not as reliable as 1.32build03 we are going to officially release 1.32build03 to the public so people that aren't aware of the forums can get that code. From this point on we should be able to tackle additional issues in 1.32"

Jump ship if you like and I know the Dir 655 has had issues, but thats only because Dlink never shipped it with all the features programmed in. We are the test bed as frustrating as it my be, I really doubt your going to find another router with the same or better features.
The problems are not solved over night, the fixes have to be programmed in.
Look @ how many betas have been released to try to address the issues, Dlink is working on the issues.

R3XNebular · « **Reply #7 on:** July 21, 2009, 07:34:59 AM »

Quote from: jason1722x on July 21, 2009, 04:58:23 AM

from Ru_Fi_Oh
"Well judging by the feedback here 1.32 build 03 is more reliable and stable. Yes shareport still has issues and we're working on hammering those issues out.

Being that 1.31 is the latest official firmware and is not as reliable as 1.32build03 we are going to officially release 1.32build03 to the public so people that aren't aware of the forums can get that code. From this point on we should be able to tackle additional issues in 1.32"

Jump ship if you like and I know the Dir 655 has had issues, but thats only because Dlink never shipped it with all the features programmed in. We are the test bed as frustrating as it my be, I really doubt your going to find another router with the same or better features.
The problems are not solved over night, the fixes have to be programmed in.
Look @ how many betas have been released to try to address the issues, Dlink is working on the issues.

yea you're probably right. Or I'll just buy my own printer sounds like a better idea instead of sharing

jason1722x · « **Reply #8 on:** July 21, 2009, 07:59:38 AM »

Quote from: R3XNebular on July 21, 2009, 07:34:59 AM

yea you're probably right. Or I'll just buy my own printer sounds like a better idea instead of sharing

I never like the Idea of sharport with a router, I mean if you want a NAS device buy one, print server buy one.
Besides most OS's have printer sharing..etc..
That stuff is stepping outside the realm of routing (routers).

good luck to ya

Demonized · « **Reply #9 on:** July 21, 2009, 09:44:40 AM »

Quote from: jason1722x on July 21, 2009, 07:59:38 AM

I never like the Idea of sharport with a router, I mean if you want a NAS device buy one, print server buy one.
Besides most OS's have printer sharing..etc..
That stuff is stepping outside the realm of routing (routers).

good luck to ya

Agree, if you demand a lot from these features you really need to consider dedicated equipment. That's basic rule when you buy a router: it needs to perform on the key features. And that's routing.

And for your knowledge, perfectionists out there: there isn't a router out there that's without some issues. Just have a look on the forums. So there will never be a perfect world, also becase there might be an issue with some of the network configs out there.

onebyside · « **Reply #10 on:** July 21, 2009, 09:59:56 AM »

Quote from: jason1722x on July 21, 2009, 07:59:38 AM

I never like the Idea of sharport with a router, I mean if you want a NAS device buy one, print server buy one.
Besides most OS's have printer sharing..etc..
That stuff is stepping outside the realm of routing (routers).

good luck to ya

well said

jim2664258 · « **Reply #11 on:** July 21, 2009, 11:54:00 AM »

On the other hand, you could buy a cheap DLink Print Server and have no issues at all. I got one from buy.com on sale for $20 and use it with the DIR-655 and I have never had a single problem, ever. I tried SharePort but very quickly abandoned it as I really did not like relying on individual users to release the resource so someone else could use it.

jdrom · « **Reply #12 on:** July 21, 2009, 08:26:42 PM »

And if people are using Shareport for merely printer sharing, just buy a new printer that has networking support. It's an ever growing feature these days and will save you the hassle. So when your ink runs out, get a new printer

jason1722x · « **Reply #13 on:** July 21, 2009, 08:34:18 PM »

Quote from: jdrom on July 21, 2009, 08:26:42 PM

And if people are using Shareport for merely printer sharing, just buy a new printer that has networking support. It's an ever growing feature these days and will save you the hassle. So when your ink runs out, get a new printer

Ink cost hafe what the printer dose.

kiccolsd · « **Reply #14 on:** July 22, 2009, 05:08:46 AM »

I'm using 1.32 beta03 (2009/07/09) it's the same of the official 1.32? By the way beta03 (also 02) roks!

D-Link Forums

News:

Author Topic: 1.32 is Final (Read 13717 times)

jason1722x

1.32 is Final

R3XNebular

Re: 1.32 is Final

R3XNebular

Re: 1.32 is Final

neok

Re: 1.32 is Final

cdvision

Re: 1.32 is Final

R3XNebular

Re: 1.32 is Final

jason1722x

Re: 1.32 is Final

R3XNebular

Re: 1.32 is Final

jason1722x

Re: 1.32 is Final

Demonized

Re: 1.32 is Final

onebyside

Re: 1.32 is Final

jim2664258

Re: 1.32 is Final

jdrom

Re: 1.32 is Final

jason1722x

Re: 1.32 is Final

kiccolsd

Re: 1.32 is Final