Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[mrdorkdar]

So I have 2 brand new 2132lb cameras on wifi to my AirPort Extreme, and a 202l hard wired To the router. The recordings are supposed to be continuous but they aren’t. Every few minutes, there is a 20-45 second gap in the recording. It just skips when I play it back. All software is up to date. Any ideas? I already tried lowering the frame rate to 15 and the data rate all the way down to 512mb and the ip is on static.

[RYAT3]

What happens when watching LIVE?  Does it say "Connecting" ?  Or is it continuous?

[mrdorkdar]

Live appears to be continuous. Looks like it’s just the recordings.

[RYAT3]

Which hard drive?

I don't have a 2132lb to test or airport extreme.

Any qos on router?

[mrdorkdar]

Ive got two Lexar 64gb usb 3.0 thumb drives brand new plugged in. What is qos?

[FurryNutz]

Link>Welcome!

• What Hardware version is your DNR? Look at the sticker behind or under the device.
• Link>What Firmware version is currently loaded? Found on the DNSs web page under status.
• What region are you located?

What wireless modes are you using on the router? What generation is the AE router?
Is uPnP and uPnP Port Forwarding enabled on both cameras?

So I have 2 brand new 2132lb cameras on wifi to my AirPort Extreme, and a 202l hard wired To the router. The recordings are supposed to be continuous but they aren’t. Every few minutes, there is a 20-45 second gap in the recording. It just skips when I play it back. All software is up to date. Any ideas? I already tried lowering the frame rate to 15 and the data rate all the way down to 512mb and the ip is on static.

[GreenBay42]

If you click Manual Record (from the live video page on the DNR-202L) and let it record for a while do you get the gaps?

[mrdorkdar]

Link>Welcome!

• What Hardware version is your DNS? Look at the sticker behind or under the device.
• Link>What Firmware version is currently loaded? Found on the DNSs web page under status.
• What region are you located?

What wireless modes are you using on the router? What generation is the AE router?
Is uPnP and uPnP Port Forwarding enabled on both cameras?

Hardware version is B. The firmware version for the cameras is 2.13.03. The router is the Extreme, not sure what generation. Forwarding is not enabled. I am in So-Cal. WPA2-PSK authentication. I have the wireless modes on automatic.

[mrdorkdar]

If you click Manual Record (from the live video page on the DNR-202L) and let it record for a while do you get the gaps?

No I believe I don't. I believe it is just in the recordings.

[FurryNutz]

What FW version is on the DNR?

[mrdorkdar]

What FW version is on the DNR?

Agent Version :     
2.1.0-b18
 
Current NVR Firmware Version :     
v2.04.03
 
Firmware Date :    
Jul 21 2016
 
Current NVR Device Pack :    
v2.14.02
 
Device Pack Date :    
Jul 21 2016

[GreenBay42]

I am assuming you set up continuous recording and not motion detection?  What are you using for playback? The app? Browser? mydlink.com? or 3rd party software?

[mrdorkdar]

I am assuming you set up continuous recording and not motion detection?  What are you using for playback? The app? Browser? mydlink.com? or 3rd party software?

Yes continuous for both cameras.

[FurryNutz]

Are those spaces in between on each line? If your continuously recording the bar should be completely solid going across.

[mrdorkdar]

Are those spaces in between on each line? If your continuously recording the bar should be completely solid going across.

Exactly. What is why I started this thread