Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[prxlamim]

Hi,
I have a DIR-655 and I would like to directly access the webinterface on my DSL-360T (also from D-Link) which ist connected to the DIR-655's WAN port and acts as a bridge. The DIR-655 is configured to establish a PPPoE connection over the WAN port. I though of manually setting up a route on the WAN port but I'm not quite  sure how to do that. Help please?

IP configs:
My PC: 192.168.1.10
DIR-655: 192.168.1.248 (FW 1.32NA)
DSL-360T: 192.168.1.1 (FW 20060220)

[Fatman]

If the WAN of the DIR is on the 192.168.1.0/24 net then you are going to have problems regardless.  You are going to want to get the DIR and DSL on different LAN nets.  That is your first step.

[prxlamim]

Now the, DSL-360T has the 192.168.0.1/24 and the DIR-655 still 192.168.1.248/24
What do I do next? Thanks.

[Fatman]

if it is going to be possible to access it over the WAN port it will be now, try it if it works that is good else wise that is bad.

What is your DIR-655's public IP?

[prxlamim]

192.168.0.1 is not reachable. The public IP is 92.74.123.238. My provider's gateway is 92.74.112.1 which is telling me that 192.168.0.1 is not reachable.

[Fatman]

then there is going to be no way to manage that modem from behind your router.  If this router supports WAN routes that might be your hail mary here, but I wouldn't hold out too far on any hopes.