• May 17, 2025, 09:58:23 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Pages: 1 [2] 3 4 ... 7

Author Topic: 1.32 Build 3 Shareport issues.  (Read 65450 times)

Demonized

  • Level 4 Member
  • ****
  • Posts: 421
Re: 1.32 Build 3 Shareport issues.
« Reply #15 on: July 30, 2009, 12:42:15 PM »
It runs fine with 7 x64... Are you on x86? remember 7 is RC (beta)
Logged

sgt

  • Level 1 Member
  • *
  • Posts: 7
Re: 1.32 Build 3 Shareport issues.
« Reply #16 on: July 30, 2009, 04:26:07 PM »
I upgraded silex to 3.2.3 and so far 3 days in with working shareport.  Keeping my fingers crossed!
This is with A3 and windows 7 x64
Logged

teribol

  • Level 1 Member
  • *
  • Posts: 8
Re: 1.32 Build 3 Shareport issues.
« Reply #17 on: July 30, 2009, 06:53:03 PM »
there must be a difference between the 64bit and the 32bit installers that came with the SX Virtual Link v 3.2.3 download. I used the 32bit installer because my W7 is 32bit. I hope that Silex get wind of this and post an updated 32bit installer.

I think that the problem is quite clear now. There is no problem with the firmware update (1.32NA). It is the virtual link that has a problem (specially the DLink version 1.10 of the silex program). The only difference i noticed between the 1.21 firmware-1.14 client pair and the new 1.32Na-SX 3.2.3 pair is how fast the connection is. The former is faster but the latter has nicer interface.
Logged

sgt

  • Level 1 Member
  • *
  • Posts: 7
Re: 1.32 Build 3 Shareport issues.
« Reply #18 on: July 30, 2009, 08:00:51 PM »
Well, scratch that.  No sooner had I posted than it stopped working.  Figures doesnt it... lol

Same deal as before. 
Logged

Croket

  • Level 1 Member
  • *
  • Posts: 19
Re: 1.32 Build 3 Shareport issues.
« Reply #19 on: July 30, 2009, 10:58:57 PM »
I don't understand why these developers don't take a look at firmware-1.21 / 1.14 client pair and the new 1.32NA / Client 1.10 then make a comparison to see what the major changes were made, then revert it.  the former worked just fine as far as the connection issue.  I"m by no means a programmer or developer but I would imagine that would be a good place to start.

The selling point for me on this router was the shareport feature, it would be a shame and a disappointment if Dlink can't resolve this issue.


Dir-655
HW Ver A4
FW Ver 1.32
Logged
dir-655 HW Ver A4   FW 1.31

alphanumeric

  • Level 3 Member
  • ***
  • Posts: 156
Re: 1.32 Build 3 Shareport issues.
« Reply #20 on: August 03, 2009, 07:20:52 AM »
This sucks, same issue with Shareport on my 655 with 1.32NA.  >:(  Maybe they should add a timed auto reboot option to the next firmware.  ::)
Logged

tonyjk3

  • Level 1 Member
  • *
  • Posts: 12
Re: 1.32 Build 3 Shareport issues.
« Reply #21 on: August 04, 2009, 09:39:03 PM »
I don't want my router to have to reboot daily just to get the shareport to work. I seem to get about two days out of either the dlink software or the other SX software. It's silly.

DIR-655
Hardware Version: A2
Firmware Version: 1.32NA

Windows Vista SP 2
Core2 Quad Chipset

there has got to be a fix out there.
Logged

kovboi

  • Level 1 Member
  • *
  • Posts: 7
Re: 1.32 Build 3 Shareport issues.
« Reply #22 on: August 06, 2009, 11:49:33 PM »
I have the same issue, also.  My 655 has the 1.32NA firmware.  Restoring the factory defaults did nothing to help, nor did using the SX software instead of the shareport utility.  I hope D-Link comes through with a fix for this quickly.

update: doing a hard reset (using the pinhole on the back of the router) seems to have fixed the problem, at least for the moment. i can now connect to my printer and the shareport utility doesn't lose the connection after a few seconds.
« Last Edit: August 07, 2009, 07:38:15 AM by kovboi »
Logged

teribol

  • Level 1 Member
  • *
  • Posts: 8
Re: 1.32 Build 3 Shareport issues.
« Reply #23 on: August 07, 2009, 08:24:13 AM »
I tried installing the SX Virtual Link on Windows Vista and it works. I even used a USB hub and i can connect to all the devices connected to the hub at the same time. I had an HP multifunction printer and a Seagate 1Terabyte External disk attached to a USB hub. I was able to use the scanner function without having to attached the multifunction printer locally.

So now only thing im waiting for...an updated SX Virtual Link client for Windows 7 hu hu hu. :'(
Logged

Demonized

  • Level 4 Member
  • ****
  • Posts: 421
Re: 1.32 Build 3 Shareport issues.
« Reply #24 on: August 07, 2009, 11:10:14 AM »
Quote from: teribol on August 07, 2009, 08:24:13 AM
I tried installing the SX Virtual Link on Windows Vista and it works. I even used a USB hub and i can connect to all the devices connected to the hub at the same time. I had an HP multifunction printer and a Seagate 1Terabyte External disk attached to a USB hub. I was able to use the scanner function without having to attached the multifunction printer locally.

So now only thing im waiting for...an updated SX Virtual Link client for Windows 7 hu hu hu. :'(

It works fine with Windows 7.  ::)
Logged

tonyjk3

  • Level 1 Member
  • *
  • Posts: 12
Re: 1.32 Build 3 Shareport issues.
« Reply #25 on: August 07, 2009, 07:37:58 PM »
Rebooting the router gets it to work for like two days and then it quits for some odd reason. I've tried Shareport and the SX software.
Logged

kovboi

  • Level 1 Member
  • *
  • Posts: 7
Re: 1.32 Build 3 Shareport issues.
« Reply #26 on: August 07, 2009, 09:26:07 PM »
i spoke too soon.  while the shareport utility works for my desktop that's connected to a LAN port, every time my wife tries to connect wirelessly causes the router to reboot.
Logged

stonehead

  • Level 2 Member
  • **
  • Posts: 31
Re: 1.32 Build 3 Shareport issues.
« Reply #27 on: August 08, 2009, 01:33:40 AM »
2 hours ago I installed SX virtual link, and have been using it instead of shareport utility from D-link,
and doing the extensive tests with one printer and one external HD from 2 XP machines,
so far so good. No more hang at 'available' status. And more than 2GB data transfer from HD
thru wireless without any problem. Everything works perfectly. I'm very happy with it.
I'll keep testing because someone here experienced it stopped working after a couple of days.
By the way, the firmware is 1.31.
(I haven't upgraded to 1.32  because many people reported secureport problem in 1.32).


 
Logged

viinceennt

  • Guest
Re: 1.32 Build 3 Shareport issues.
« Reply #28 on: August 08, 2009, 10:44:45 AM »
Quote from: stonehead on August 08, 2009, 01:33:40 AM
2 hours ago I installed SX virtual link, and have been using it instead of shareport utility from D-link,
and doing the extensive tests with one printer and one external HD from 2 XP machines,
so far so good. No more hang at 'available' status. And more than 2GB data transfer from HD
thru wireless without any problem. Everything works perfectly. I'm very happy with it.
I'll keep testing because someone here experienced it stopped working after a couple of days.
By the way, the firmware is 1.31.
(I haven't upgraded to 1.32  because many people reported secureport problem in 1.32).


 

wait until the 3rd day... the shareport wont work unless you reboot the router.

if it is still working on the 3rd day, let me know :)
Logged

stonehead

  • Level 2 Member
  • **
  • Posts: 31
Re: 1.32 Build 3 Shareport issues.
« Reply #29 on: August 09, 2009, 08:21:10 AM »
Quote from: viinceennt on August 08, 2009, 10:44:45 AM
wait until the 3rd day... the shareport wont work unless you reboot the router.

if it is still working on the 3rd day, let me know :)

I wished your guess was wrong, but...
Like other reports here,
after 1.5 days, it doesn't work anymore.
It disconnects after few seconds.

Logged
Pages: 1 [2] 3 4 ... 7
« previous next »