Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[FurryNutz]

D-Link posted DNS-320L firmware version v1.10 B03, which can be downloaded here: DNS-320L.
07/12/2017

HW Versions Supported:
DNS-320L A1/A2/A3
DNS-320LW A1/A2

Problems Resolved:
Fixed Security vulnerability listed below:
• Fixed the SAMBA security issues. CVE-2017-7494
• Fixed the login mydlink failure issue while the DNS server condition is abnormal.

Enhancements:
None
Known Issues:
None


Let us know how it works for you...

[dani0001414]

Dear FurryNutz!

This firmware release notes i found this mentions: " Remove Xunlei Add-on as the 3rd party service is suspended."
What does it means? The Xunlei ADD-ON deleted becouse of  they the 3rd party service suspended or the Dlink suspended all 3rd party ADD-ON cappabilityes?

I asking this becouse i want to upgrade the next firmware but i want to use vtrcron to execute hdsentinel arm based linux application at a spedific time.
Thank you for your reply for advanced.

[FurryNutz]

I'm not sure what that means. I presume i may be that the 3rd party ADD ON services are not working anymore.

I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this. The US offers Chat support for consumer products at support.dlink.com. 24/7. We find that phone contact has better immediate results over using email.
Let us know how it goes please.

[ivhorn]

I've upgraded firmware from 1.08 to this version but after that my NAS is not more able to go in suspend mode.
Do anyone else experience this problem? Is it related to this version or to any previous ones?
How to solve it?

Thanks in advance

[FurryNutz]

Link>Welcome!

• What region are you located?

Was the suspend mode working on v1.08 before upgrading?
Are there any notes in the new FW update release notes about any power saving features being changed?
How are you determining that suspend mode isn't working?

You might try doing a save config to file as a back up. Then factory reset the DNS and set up the DNS and set up the power saving feature and test. You don't loose any data on the drives.

I've upgraded firmware from 1.08 to this version but after that my NAS is not more able to go in suspend mode.
Do anyone else experience this problem? Is it related to this version or to any previous ones?
How to solve it?

Thanks in advance

[ivhorn]

Hi, some answers to your questions
I'm located in Europe
Yes, suspend mode was working before update
No power management reference in release notes
I realize suspend mode is not working cause the two blue leds are always on
I tried to factory reset DNS but I didn't solved the problem

Link>Welcome!

• What region are you located?

Was the suspend mode working on v1.08 before upgrading?
Are there any notes in the new FW update release notes about any power saving features being changed?
How are you determining that suspend mode isn't working?

You might try doing a save config to file as a back up. Then factory reset the DNS and set up the DNS and set up the power saving feature and test. You don't loose any data on the drives.

I've upgraded firmware from 1.08 to this version but after that my NAS is not more able to go in suspend mode.
Do anyone else experience this problem? Is it related to this version or to any previous ones?
How to solve it?

Thanks in advance

[FurryNutz]

You might revert back to prior version of FW and see if this revolves this.

Hi, some answers to your questions
I'm located in Europe
Yes, suspend mode was working before update
No power management reference in release notes
I realize suspend mode is not working cause the two blue leds are always on
I tried to factory reset DNS but I didn't solved the problem

Link>Welcome!

• What region are you located?

Was the suspend mode working on v1.08 before upgrading?
Are there any notes in the new FW update release notes about any power saving features being changed?
How are you determining that suspend mode isn't working?

You might try doing a save config to file as a back up. Then factory reset the DNS and set up the DNS and set up the power saving feature and test. You don't loose any data on the drives.

I've upgraded firmware from 1.08 to this version but after that my NAS is not more able to go in suspend mode.
Do anyone else experience this problem? Is it related to this version or to any previous ones?
How to solve it?

Thanks in advance

[Cholera]

Hi!
I updated my 320l from 1.04 to 1.10.
Now my mac cannot connect to the nfs any more (tries to connect, then closes).
Kodi which is located on my fire-tv cann access via smb.
I resetted the nfs sharings, uses & co.
now i connect via user credentials, but still the same.
any know issues?

cheers,
cholera

[slbowles]

I find it odd that the device's web admin interface only reports the firmware as "1.10" and doesn't report the build number.

[bigappleu2]

Hi,

I just upgraded my firmware on DNS320-L to FW 1.10.
Apparently, the upgrade went well, and the NAS restarted.
After the restart, I can't use the Windows interface (the one from where I upgraded the firmware), and I can't even connect to the NAS via putty.
How can I revert the firmware upgrade ?

Any help would be appreciated,
Thanks by advance,

[FurryNutz]

You can download the prior version of FW and apply it...