Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Robert298-d]

HI:
 
 A DSR500 route, Setup Static DNS. Can access the static DNS network in route. But can not access from a machine which under the router.
DSR500 LAN: 10.168.0.1; 255.255.255.0, gateway: 10.168.0.1 second router WAN2 use IP 10.168.0.5 to connect to DSR500 lan Static DNS: dest: 192.28.1.0; mask 255.255.255.0; gateway: 10.168.0.5

in the DSR500 to ping 192.28.1.1 is ok. my machine ip is 10.168.0.100(DHCP) which can not ping 192.28.1.1

Any other configurations need to setup? I used DSR250 for static DNS. it simple to setup and work fine.

[FurryNutz]

Link>Welcome!

• What Hardware version is your router? Look at sticker under the router case.
• Link>What Firmware version is currently loaded? Found on the routers web page under status.
• What region are you located?

Internet Service Provider and Modem Configurations

• What ISP Service do you have? Cable or DSL?
• What ISP Modem Mfr. and model # do you have?

Usually you can't access resources across different sub nets or networks. Might check the user manual for some Route configuration information that could be used.