• November 01, 2024, 09:36:46 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Connect to Wireless access point  (Read 3435 times)

kjetilhansen

  • Level 1 Member
  • *
  • Posts: 1
Connect to Wireless access point
« on: February 26, 2018, 11:21:47 PM »
Hello all  :)

At work the wi-fi extender is to far away so I brought my own.

I have connected it to the network and am connected to it with my phone. The extender is DWL-2100AP.

The problem is that I want to connect to it and change the SSID and set a password. But I am not on the default gateway so it does not work to connect to 192.168.0.50

On my phone it sais the router adress is 10.140.37.1 and subnet 255.255.255.128 (the subnet is the same as the cabled computer is on)

How can I find the accesspoint and configure it?
Logged

GreenBay42

  • Administrator
  • Level 11 Member
  • *
  • Posts: 2752
Re: Connect to Wireless access point
« Reply #1 on: February 27, 2018, 07:52:23 AM »
Try this FAQ --> http://support.dlink.com/FAQView.aspx?f=ibYg%2bfbbFlsNOM91jFFS%2bg%3d%3d

This being an older product http://dlinkap.local. most likely will not work. You can check the dhcp table in your router to see what IP address it got assigned or manually configure it (FAQ link above).

Remember this AP only supports 802.11g/b connections. This AP also does not support WPA/WPA2, only WEP. If the router is newer (802.11N or AC), connectivity may not be the best. 

For QIG and manual, go here --> http://support.dlink.com/ProductInfo.aspx?m=DWL-2100AP
Logged