Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[GreenBay42]

Dont install it yet. 

but normally if the firmware does take, you should be able to downgrade the firmware (upgrade to an older file).

[GreenBay42]

Firmware versions 2.xx.xx are for revision B so you should be OK installing this beta firmware.

[PierreBe]

Thx!

*Installing...........*
(fingers crossed)

Any change to see what's new in it?

[PierreBe]

SUCCES!

IP Camera Name   DCS-2670L
Time & Date   Fri Dec 21 18:56:23 2018
Firmware Version   2.01.03
Hardware Version   B
Agent Version   2.2.0-b25n

[GreenBay42]

i am not sure what changes since this camera is not sold in the US. The beta is to fix FTP connectivity and FTP password issues. No release notes were included.

[PierreBe]

I can confirm this.
Like I stated before you shouldn't set files bigger then 5000 bytes for FTP upload or it fails,
testing with this beta I've seen that even if you put 50.000 as a value it will be changed to 5.000
automatically so the issue with the FTP is over

Again THANK YOU VERY MUCH for pointing me to this update, even if I already found out what the issue was
Great support!

[FurryNutz]

Enjoy. 

[GreenBay42]

Glad it worked and you confirmed the issue/limitation. You may want to still contact support in your area and see if an increase in file size will be possible. it is a possible limitation of the chipset/memory.

[PierreBe]

Thx FurryNutz

GreenBay42; yes I could ask them, curious as I am just to know why.
Those 5MB files are so small that they are almost useless.
It could be it's for traffic or limitations on the SMB side, but I have a
Eminent cam which can record to the same FTP drive continuously, so...

At least they should provide a program to stitch them together

[patvdleer]

Ok just to recap:

I've bought 3 of these 2670L, just in case I bought 2 at 4launch.nl and 1 via bol.com, both dutch stores.

Code: [Select]

IP Camera Name DCS-2670L-TUIN
Time & Date Sun Jan 20 20:3:31 2019
Firmware Version 2.00.02
Hardware Version B
MAC Address B0:C5:54:XX:XX:XX
IP Address 192.168.178.11
IP Subnet Mask 255.255.255.0
Default Gateway 192.168.178.1
Primary DNS 84.116.xx.xx
Secondary DNS 84.116.xx.xx
PPPoE Disable
DDNS Disable
Agent Version 2.2.0-b25
Dutch
https://eu.dlink.com/nl/nl/products/dcs-2670l-full-hd-180-outdoor-wifi-camera
1.10.02    Firmware    8-11-2017

UK
https://eu.dlink.com/uk/en/products/dcs-2670l-full-hd-180-outdoor-wifi-camera
1.10.02    Firmware    08/11/2017

Canada
http://support.dlink.ca/ProductInfo.aspx?m=DCS-2670L * only notes hardware version A
2.00.02 Firmware 06/07/18

ftp://ftp2.dlink.com/PRODUCTS/DCS-2670L/BETA/ (found in this thread)
V2.01.03 -> DCS-2670L_A1_FW_V2.01.03(1030103739).bin

Code: [Select]

IP Camera Name DCS-2670L-TUIN
Time & Date Sun Jan 20 20:19:54 2019
Firmware Version 2.01.03
Hardware Version B
MAC Address B0:C5:54:XX:XX:XX
IP Address 192.168.178.11
IP Subnet Mask 255.255.255.0
Default Gateway 192.168.178.1
Primary DNS 84.116.xx.xx
Secondary DNS 84.116.xx.xx
PPPoE Disable
DDNS Disable
Agent Version 2.2.0-b25n

I can confirm it comes back online, I have not yet tested the rest

-- EDIT --

I can confirm the FTP does work now! Going to update/upgrade the others cams too

-- EDIT --

Sadly enough, only the first cam is working as it should be, the other 2 don't actually write to FTP

-- EDIT --

It looks like there is a limitation on the length of the account name for the ftp

If I switch the frontdoor(voordeur) cam to the garden (tuin) it does work...

The camera_oprit and camera_voordeur don't work, the camera_tuin does work, the strangest thing of all is that on all accounts the IPCamTestFile.txt file is set

[dxtr80]

Hi all,

I had the same issue with 2670L, bought in Poland a month ago.
Basiclly, FTP connection is still not working even after installing BETA FW (DCS-2670L_A1_FW_V2.01.03(1030103739).bin).

Same connection is working well on another DCS-5222LB without issues.

Changing password didn't help. Always "Test Error."

BR,
Robert

[FurryNutz]

I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this.
Link> Tech Support Contact Information
We find that phone contact has better immediate results over using email.

[alantch]

I have exactly the same issue, except my hardware version is A and not B. Is there a beta firmware I can try that will resolve this FTP issue? I have contacted DLink technical support, and so far there has been no answer from them. I am from Malaysia BTW - I know this is a USA only forum but I have no recourse but to come here for a solution since other users here are experiencing the same issues.
Any help appreciated. TIA.