Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[guptakaushal009]

Hi,

I am using D-Link DIR-825 AC router to configure IPv6 dynamically.
I am having IPv4 WAN connection. I want to configure IPv6 dynamically by the router.
WAN  =ipv4=>  ROUTER =ipv6=> SYSTEM(running OS, Want IPv6 IP assigned by router)
Which method is good to go ?

Thanks,
-Kaushal

[FurryNutz]

Link>Welcome!

• What Hardware version is your router? Look at sticker under the router case.
• Link>What Firmware version is currently loaded? Found on the routers web page under status.
• What region are you located?

I recommend that you review the user manual for IPv6 setup and configuration.

[guptakaushal009]

Hi,

H/W version :- G1
F/W version :- 7.00
Region:- India

I have gone through manual for IPv6 and configured accordingly but still i am not getting IPv6 address dynamically.

Thanks,
-Kaushal

[FurryNutz]

Be sure your PC or device has IPv6 enabled as well...
Does your ISP support native IPv6 from there services?

[GreenBay42]

So you want just your local network IPv6?  Not a common setup.

In the IPv6 section, next to My IPv6 Connection select "local connectivity only". 

[guptakaushal009]

ISP doesn't support IPv6.
Is there any option to get IPv6 dynamically by the router if we do connect IPv4 from WAN to router ?
Setup:
     WAN      ==ipv4=>     ROUTER    ==ipv6=>     SYSTEM (need IPv6 address by the router)

It's just for some experiment.

Thanks,
-Kaushal

[FurryNutz]

Setting "local connectivity only" should get a dynamic IPv6 IP address from the router.