Topic: New - COVR-2202 Firmware v1.03 Build10 Released (Read 7809 times)

FurryNutz · « **on:** June 30, 2019, 11:20:32 AM »

Firmware: v1.03B10 06/28/2019 NA Region Only
Revision Info
Problems Resolved:
1. Fix VLAN issue (ISP Profile can’t be selected in Web UI)

Enhancements:
1. Support Tri-band for COVR COVR-2200 single pack (Bundle Name= COVR COVR-2200)
2. Support COVR Reunion
3. Support CAP Bridge Mode

Known Issues:
1. There is IOT issue when COVRCOVR-2200 connect with Intel AC8265AC8265. This issue will be fixed in v1.04.

Get it here: NA Region
COVR-2200

Please follow the> FW Update Process to ensure a good FW upgrade is performed.

Let us know how it works for you...

FurryNutz · « **Reply #1 on:** June 30, 2019, 11:45:30 AM »

Updated my system today.

I first attempted to update the B Point first. First two attempts after logging into the B Points UI from the A point would not take the update. Kept saying the FW update failed. Upon a 3rd try the file was finally sent and the B Point accepted it and began to process it. The A point took the update file on first attempt with out issue. Using Opera browser.

I think Guest Network is working as expected now. It's enabled when it's enabled and disabled when it's disabled.

I see a Wireless + menu option for Schedule under wireless. Seems a user needs to ADD a schedule here and then configure anything here. Using the Time/Schedule is no longer seen here if configured there. Wireless schedule seems to be working now if nothing is selected in the schedule. However the WiFi radio is still being broadcast, and the SSID is hidden when using this. Makes sense since the B point needs a signal from the A point.

AP Mode is now seeing under Operation.

I'll give this a try. We probably need to know if the B point can be used in AP mode and weather the B point can be LAN connected as well? Or only the A Point needs to LAN connected while B point is wireless connected?

We would like to know what the following means for users and this system:
1. Support Tri-band for COVR COVR-2200 single pack (Bundle Name= COVR COVR-2200)
2. Support COVR Reunion
3. Support CAP Bridge Mode

aoeking@gmail.com · « **Reply #2 on:** July 18, 2019, 12:50:32 AM »

I have updated with the latest update and now I cannot login to the router as it does not load the captcha. When I check the response from the router, I found that the router sends 404 for the captcha image.

<html>
<head><title>404 Not Found</title></head>
<body bgcolor="white">
<center><h1>404 Not Found</h1></center>
<hr><center>nginx/1.12.2</center>
</body>
</html>

I have restarted the router, still no luck.

Any advice before replacing the item?

Thanks

FurryNutz · « **Reply #3 on:** July 18, 2019, 06:06:42 AM »

Link>Welcome!

What region are you located?
Are you wired or wireless connected to the router?
Has a Factory Reset been performed?

What browser are you using? I didn't see this when I loaded FW while using Opera browser.

Quote from: aoeking@gmail.com on July 18, 2019, 12:50:32 AM

I have updated with the latest update and now I cannot login to the router as it does not load the captcha. When I check the response from the router, I found that the router sends 404 for the captcha image.

<html>
<head><title>404 Not Found</title></head>
<body bgcolor="white">
<center><h1>404 Not Found</h1></center>
<hr><center>nginx/1.12.2</center>
</body>
</html>

I have restarted the router, still no luck.

Any advice before replacing the item?

Thanks

FurryNutz · « **Reply #4 on:** July 19, 2019, 10:08:12 AM »

Any Status on this?

Quote from: aoeking@gmail.com on July 18, 2019, 12:50:32 AM

I have updated with the latest update and now I cannot login to the router as it does not load the captcha. When I check the response from the router, I found that the router sends 404 for the captcha image.

<html>
<head><title>404 Not Found</title></head>
<body bgcolor="white">
<center><h1>404 Not Found</h1></center>
<hr><center>nginx/1.12.2</center>
</body>
</html>

I have restarted the router, still no luck.

Any advice before replacing the item?

Thanks

FurryNutz · « **Reply #5 on:** July 19, 2019, 01:19:43 PM »

Factory reset.
Setup from iPhone with mydlink.app.
Windows 10x64 wired to 2200.
Edge doesn't display Settings/Internet, Network and Features/firewall, Port forwarding, DDNS pages. $:-\$ Where other browsers do.

Not seeing any CAPTCHA on the log in screen on mine.

Quote from: aoeking@gmail.com on July 18, 2019, 12:50:32 AM

I have updated with the latest update and now I cannot login to the router as it does not load the captcha. When I check the response from the router, I found that the router sends 404 for the captcha image.

<html>
<head><title>404 Not Found</title></head>
<body bgcolor="white">
<center><h1>404 Not Found</h1></center>
<hr><center>nginx/1.12.2</center>
</body>
</html>

I have restarted the router, still no luck.

Any advice before replacing the item?

Thanks

GreenBay42 · « **Reply #6 on:** July 25, 2019, 03:32:09 PM »

I believe they are removing the captcha option in some of the routers. This happened with the 822 v1.20. I will try to get more info.

Furry, D-Link hasn't officially supported Edge

but I will report it AFTER you reset it and setup again.

I will also find out what these are:

1. Support Tri-band for COVR COVR-2200 single pack (Bundle Name= COVR COVR-2200)
2. Support COVR Reunion
3. Support CAP Bridge Mode

FurryNutz · « **Reply #7 on:** July 26, 2019, 06:22:40 AM »

Thank your for the information.

I'll reset it once more to check Edge browser.

Please let us know about those new features and about AP mode as well.

Thank you.

Quote from: GreenBay42 on July 25, 2019, 03:32:09 PM

I believe they are removing the captcha option in some of the routers. This happened with the 822 v1.20. I will try to get more info.

Furry, D-Link hasn't officially supported Edge but I will report it AFTER you reset it and setup again.

I will also find out what these are:

1. Support Tri-band for COVR COVR-2200 single pack (Bundle Name= COVR COVR-2200)
2. Support COVR Reunion
3. Support CAP Bridge Mode

FurryNutz · « **Reply #8 on:** July 27, 2019, 01:25:00 PM »

Factory reset a 2nd time.
Setup from Android pad with mydlink.app.
Windows 10x64 wired to 2200.
Edge doesn't display Settings/Internet, Network and Features/firewall, Port forwarding, DDNS pages. $:-\$

Quote from: GreenBay42 on July 25, 2019, 03:32:09 PM

I believe they are removing the captcha option in some of the routers. This happened with the 822 v1.20. I will try to get more info.

Furry, D-Link hasn't officially supported Edge but I will report it AFTER you reset it and setup again.

I will also find out what these are:

1. Support Tri-band for COVR COVR-2200 single pack (Bundle Name= COVR COVR-2200)
2. Support COVR Reunion
3. Support CAP Bridge Mode

D-Link Forums

News:

Author Topic: New - COVR-2202 Firmware v1.03 Build10 Released (Read 7809 times)

FurryNutz

New - COVR-2202 Firmware v1.03 Build10 Released

FurryNutz

Re: New - COVR-2202 Firmware v1.03 Build10 Released

aoeking@gmail.com

Re: New - COVR-2200 Firmware v1.03 Build10 Released

FurryNutz

Re: New - COVR-2202 Firmware v1.03 Build10 Released

FurryNutz

Re: New - COVR-2202 Firmware v1.03 Build10 Released

FurryNutz

Re: New - COVR-2202 Firmware v1.03 Build10 Released

GreenBay42

Re: New - COVR-2202 Firmware v1.03 Build10 Released

FurryNutz

Re: New - COVR-2202 Firmware v1.03 Build10 Released

FurryNutz

Re: New - COVR-2202 Firmware v1.03 Build10 Released