Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Ru-Fi-Oh]

If you're having issues with VoIP and this router (revB) Please let us know in detail what you're experiencing.

Who is the carrier?
What ATA are you using behind the DIR-825 revB?
Any type of error message you get from the logs?
When you try to dial out what do you get?
Can you receive or make calls?

Are you able to get to your service provider registration server?

If your service was working before what make, model and firmware was the router?

If you can, would you be able to provide packet captures of LAN and WAN?

[leonhugens]

Just look at my post (http://forums.dlink.com/index.php?topic=7282.0), or the one from Cees (http://forums.dlink.com/index.php?topic=7108.0).
It is working perfectly on my wrt150n (Linksys) and my wrt610n (also Linksys).

[Cees]

If you're having issues with VoIP and this router (revB) Please let us know in detail what you're experiencing.

Who is the carrier?
What ATA are you using behind the DIR-825 revB?
Any type of error message you get from the logs?
When you try to dial out what do you get?
Can you receive or make calls?

Are you able to get to your service provider registration server?

If your service was working before what make, model and firmware was the router?

If you can, would you be able to provide packet captures of LAN and WAN?

I am using the european software version 2.01EU,  also see my forum-message http://forums.dlink.com/index.php?topic=7108.0

SIP Registration and callsetup seems to work normally, only the audio-channel setup does not work.  The only thing I see when tracing the tcp/ip data is that there is no incoming audio-channel setup.

Also when using DMZ it does not work, while DMZ should pass all traffic without any firewall or portforwarding...

I use several voip providers with SIP protocol, and different clients. One Asterisk server and one Siemens IP-Phone.  The same setup works normally with a linksys or other router

[Cees]

If you're having issues with VoIP and this router (revB) Please let us know in detail what you're experiencing.

UPDATE:
I got a link to a beta-version of the firmware from another forum-member (Thanks jooel999 !!) and have installed this beta firmware just now and I am very happy, as SIP/VOIP seems to work fine now.

This version is DIR825B1_FW201EUB16Beta01.bin  after installation the firmware date is "2.01EU , Tue, 30, Jun, 2009",  before update I had "2.01EU , Fri, 12, Jun, 2009"

[claykin]

We need some leaking beta firmware for the NA version.....

[mykroft]

but......

some sip phones need a ip from "DHCP Option 66", I have yet to find a D-Link router that supports advanced DHCP - without this my $150 VoIP phones have to be manually configured instead of getting then option 66 ip address and then getting its config from the tftp server.

Can this be added?

[maxim.krusina]

UPDATE:
This version is DIR825B1_FW201EUB16Beta01.bin

Please, can I get the beta FW too? I'm stuck with SIP...

[Cees]

Please, can I get the beta FW too? I'm stuck with SIP...

I sent you a PB, check your forum inbox.

[maxim.krusina]

I sent you a PB, check your forum inbox.

So I git it and it WORKS!!!
Thanx a lot!

PS: I hope your "injected" code is not so much harmfull ))

[mykroft]

does this fix sip and work on non EU routers - I have B1NA version and sip is broken completly

[ChickenMan]

Beta fix for SIP issues...
http://forums.dlink.com/index.php?topic=8956.0 -> NA Version
http://forums.dlink.com/index.php?topic=9161.0 -> EU Version

[ALFware]

UPDATE:
I got a link to a beta-version of the firmware from another forum-member (Thanks jooel999 !!) and have installed this beta firmware just now and I am very happy, as SIP/VOIP seems to work fine now.

This version is DIR825B1_FW201EUB16Beta01.bin  after installation the firmware date is "2.01EU , Tue, 30, Jun, 2009",  before update I had "2.01EU , Fri, 12, Jun, 2009"

Could you please send me a PM with the link ?
I'm tired of this SIP problem and I cannot find this beta EU version 
Thanks in advance !

[Cees]

Could you please send me a PM with the link ?
I'm tired of this SIP problem and I cannot find this beta EU version 
Thanks in advance !

PM sent ..

[ALFware]

Thanks for the PM Cees 
I would add SIP can also work if you downgrade to version 2.0 EU available on the D-LINK website (support).

[ChickenMan]

Beta fix for SIP issues...
http://forums.dlink.com/index.php?topic=8956.0 -> NA Version
http://forums.dlink.com/index.php?topic=9161.0 -> EU Version