Topic: DFL-VPN config problem. (newbe ) (Read 4657 times)

zeco · « **on:** November 09, 2009, 09:20:51 PM »

Hi !

I wonder if i have missed something in my VPN config and if you can help me.
I have put up a PPP tunnel and can connect to the firewall.... but when the sec VPN connection get connected the first one get disconnected

. The Licens in the fire wall say that i can have 50 tunnel`s and the authentication rule say that you can have multiple connections on the same username....

I have another starange thing.... when my VPN connection is up, i can ping my servers behind the FW and i can run RDP on the servere, but i can not map a network share

..... The rule is set to alow all services from the VPN pool to the LAN ..

IF anyone can give me a hint on what i have missed in my config i be gald....

Fatman · « **Reply #1 on:** November 10, 2009, 08:34:17 AM »

Are both of your clients connecting from the same NAT IP?

You can only have a single PPTP tunnel to any pair of endpoint IPs.

Are you trying to map that drive by IP, DNS, or by share name? Share names will not work in a PPTP environment unless you have a NBNS/WINS server set up and configured on your client.

zeco · « **Reply #2 on:** November 11, 2009, 10:42:41 PM »

AHH !!!.... yes ofc, both is nattèd thrue the same place

..... even if the computers have different IP adresses they are nattèd true the same place at my ISP

.....

I tryed to map the drive by \\IP-addsess\share name and i tryed just the \\ip-address to the server but non is working.... i will try setting up a Wins server and see if that work...

D-Link Forums

News:

Author Topic: DFL-VPN config problem. (newbe ) (Read 4657 times)

zeco

DFL-VPN config problem. (newbe )

Fatman

Re: DFL-VPN config problem. (newbe )

zeco

Re: DFL-VPN config problem. (newbe )