• February 23, 2025, 08:37:41 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: scan disk in 1.08 b8  (Read 7422 times)

mauzzz

  • Level 1 Member
  • *
  • Posts: 11
scan disk in 1.08 b8
« on: December 09, 2009, 12:52:11 PM »

Upgraded from 1.08 b5 to b8. Restored factory defaults. Scan disk still doesn't work. Scan Disk Result = FAILED.

Two WD5000AACS-00ZUB (500 Gb) in RAID1.

Hard drive info says:

Total Hard Drive Capacity:    -1 MB
Used Space:    0 KB
Unused Space:    0 MB

Those are weird figures for disks which are half full. Otherwise the NAS is working without problems.
Logged

gunrunnerjohn

  • Level 11 Member
  • *
  • Posts: 2717
Re: scan disk in 1.08 b8
« Reply #1 on: December 09, 2009, 12:57:40 PM »
I've been afraid to try the disk scan due to the previously reported errors on earlier versions of firmware.  I think my fears are still with me! :D

Does it work if you reboot the NAS?
Logged
Microsoft MVP - Windows Desktop Experience
Remember: Data you don't have two copies of is data you don't care about!
PS: RAID of any level is NOT a second copy.

mauzzz

  • Level 1 Member
  • *
  • Posts: 11
Re: scan disk in 1.08 b8
« Reply #2 on: December 09, 2009, 04:00:46 PM »
Reboot doesn't change the scan disk behavior.
Logged

cybernica

  • Level 1 Member
  • *
  • Posts: 20
Re: scan disk in 1.08 b8
« Reply #3 on: December 09, 2009, 09:52:23 PM »
scandisk works for me. I only have one Seagate    ST31000528AS.
Logged

softwizard

  • Level 1 Member
  • *
  • Posts: 6
Re: scan disk in 1.08 b8
« Reply #4 on: December 14, 2009, 07:40:42 AM »
I too am having an immediate failure with SCAN DISK.  Even after a restart (it forces you to restart when it fails), it still fails.

I have two 1.5 Seagate (ST31500541AS) running RAID0 with 1.08 b8.  I have static IP, Jumbo Frames 6000, NTP set, FTP started, Bonjour Add-On running, iTunes server on and UPnP/AV running.

I guess I will try a factory restore and see what happens...
Logged

softwizard

  • Level 1 Member
  • *
  • Posts: 6
Re: scan disk in 1.08 b8
« Reply #5 on: December 14, 2009, 07:45:32 AM »
Just an update, same thing after factory restore and NO changes to any config items (not even the first time wizard)
Logged

softwizard

  • Level 1 Member
  • *
  • Posts: 6
Re: scan disk in 1.08 b8
« Reply #6 on: December 14, 2009, 11:05:56 AM »
More fun... I also saw what Mauzz reported.  On another DNS-323, but this one with two WD 750GB drives (WD7500AAKS-00RBA) in RAID 0, I successfully ran SCAN DISK with 1.08 b 8, only to reboot and have it report -1 MB available on the status screen.

To fix it, I tried the factory restore (after backing up the config).  This fixed it.  I then loaded the old config (the same one that I had just saved) and everything is ok.

So.... unless there is some really good reason to run scan disk on the 323, I would not recommend it in this current beta release.

It would be great if the 323 had similar disk diagnostics (SMART) as the 343...
Logged