• February 22, 2025, 10:17:03 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: FTP Settings for my DCS-920  (Read 21016 times)

Mikeadamsvt

  • Level 1 Member
  • *
  • Posts: 11
FTP Settings for my DCS-920
« on: December 21, 2009, 06:38:52 PM »
I have a website I set up with godaddy to post pics from my DCS-920.  I am trying to use the DCS-920 management tools through the browser.  Under FTP Settings, no matter what I put in the fields (IP address or Domain name under Host Name, my username & password for my website, path blank or with subfolders, passive mode = yes or no) when I click "Test" it always says "Invalid FTP Server". 

I can use Filezilla or IE FTP no problem.  Any idea what I could be doing wrong?
Logged

ECF

  • Administrator
  • Level 11 Member
  • *
  • Posts: 2692
Re: FTP Settings for my DCS-920
« Reply #1 on: December 22, 2009, 08:35:28 AM »
Are your  FTP server and camera located on the same local network? If so can you access the FTP with the camera with the FTP local IP address from the camera?
Logged
Never forget that only dead fish swim with the stream

Mikeadamsvt

  • Level 1 Member
  • *
  • Posts: 11
Re: FTP Settings for my DCS-920
« Reply #2 on: December 22, 2009, 08:57:58 AM »
No, my FTP server is hosted on the internet by GoDaddy.  I want to be able to access the pictures from anywhere.
Logged

ECF

  • Administrator
  • Level 11 Member
  • *
  • Posts: 2692
Re: FTP Settings for my DCS-920
« Reply #3 on: December 22, 2009, 11:47:12 AM »
Is your FTP server secure? If so what type of security does it use and what port does it run on?
Logged
Never forget that only dead fish swim with the stream

Mikeadamsvt

  • Level 1 Member
  • *
  • Posts: 11
Re: FTP Settings for my DCS-920
« Reply #4 on: December 22, 2009, 08:01:42 PM »
yes, it's a secure hosted website.  I have a userid and password, and use port 21.  I can use Internet Explorer to ftp to the website, but I cannot get the camera itself to post there - it always says "Invalid FTP Server"
Logged

Mikeadamsvt

  • Level 1 Member
  • *
  • Posts: 11
Re: FTP Settings for my DCS-920
« Reply #5 on: December 23, 2009, 07:22:25 AM »
Does the entry in 'hostname' have to be an IP address?  Because my website is shared at hoster godaddy, I don't currently have a dedicated IP.  I have been trying to use the DNS name but I will order a dedicated IP for my website and then try again using the IP address.
Logged

Mikeadamsvt

  • Level 1 Member
  • *
  • Posts: 11
Re: FTP Settings for my DCS-920
« Reply #6 on: December 24, 2009, 04:37:00 PM »
Now that I have a dedicated IP address, I can get past clicking the 'test' button.  However, when I check on the status of the "Test" I get an error message saying "Can not connect to FTP server."  However, if I use Internet Explorer or FIlezilla to FTP to the same IP address, I have no problem uploading files.  I feel like I have tried everything, and am at a total loss as to why I cannot get my camera to FTP to my website. 

Advice please?
Logged

ECF

  • Administrator
  • Level 11 Member
  • *
  • Posts: 2692
Re: FTP Settings for my DCS-920
« Reply #7 on: December 30, 2009, 04:30:46 PM »
What type of secure FTP does godaddy use?
Logged
Never forget that only dead fish swim with the stream

elesoteric

  • Level 1 Member
  • *
  • Posts: 1
Re: FTP Settings for my DCS-920
« Reply #8 on: December 30, 2009, 04:40:04 PM »
i had the same problem originally until i entered IP address for my ftp server, then it would connect.  now different problem... i can connect fine with my cuteftp software, upload/download files fine, but when i try the "test" from the camera i see the login on my proftpd.log same as the cuteftp login: 

FTP session opened. 
ANON username: login successful. 
preparing to chroot to directory '/var/www/ftpdirectory'
FTP session closed. 

no test image file gets uploaded and session closes almost immediately after it is opened.  the error message in the d-link camera control panel is: "TCP/IP socket error."

then the proftpd log just keeps scrolling with the camera's connecting and disconnecting.
very limited in configuration of the camera's ftp server so i'm at a loss at what needs tweaking.
ANY Help will be GREATLY appreciated!
Logged

orengo

  • Level 1 Member
  • *
  • Posts: 1
Re: FTP Settings for my DCS-920
« Reply #9 on: April 23, 2010, 03:58:20 PM »
 ??? My DCS 920 donīt works ftp server. The firmware is actual.
Logged

Mackerel

  • Level 3 Member
  • ***
  • Posts: 348
Re: FTP Settings for my DCS-920
« Reply #10 on: April 23, 2010, 09:12:56 PM »
I have had no problems with any of my 920's... They all connect to a ftp-server no problem...
Logged

yacc

  • Level 1 Member
  • *
  • Posts: 1
Re: FTP Settings for my DCS-920
« Reply #11 on: August 14, 2010, 02:36:58 PM »
I found a nice how-to setup a 920 with a free online camera viewing/recording service here : http://www.tsheffler.com/blog/?p=187
the author mentions potential DNS issues, that might help
Logged