• May 18, 2025, 11:52:54 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Upgraded to 1.33NA but router still says 1.32NA  (Read 5619 times)

Victor

  • Level 1 Member
  • *
  • Posts: 6
Upgraded to 1.33NA but router still says 1.32NA
« on: April 14, 2010, 01:39:51 AM »
I just upgraded the firmware on my DIR-655 to 1.33NA, but the admin pages still say 1.32NA. Has anyone else seen this? I tried it twice, so I know I didn't just pick the wrong file, and it unpacked with the correct release notes.

The log says "firmware upgrade image successfully uploaded - installing" followed by all the expected messages.


Tools/Firmware shows:

Firmware Information

Current Firmware Version : 1.32NA

Current Firmware Date : 2009/11/05


Also, it has this Advanced DNS description, which may be new:

Advanced DNS is a free security option that provides Anti-Phishing to protect your 
Internet connection from fraud and navigation improvements such as auto-correction 
of common URL typos.


Thanks!

Logged

marmoduke

  • Level 3 Member
  • ***
  • Posts: 164
Re: Upgraded to 1.33NA but router still says 1.32NA
« Reply #1 on: April 14, 2010, 04:31:05 AM »
Sounds like a "partial" success.

I would try this.

Download a fresh copy of the 1.33NA firmware.  Do not use the one that you have already used as it may be corrupt.

Redo the "flashing" of the firmware from the new copy.

Reset the router to factory defaults, not just reboot.

Enter your preferred settings.

Hope this helps.

Logged

Sammydad1

  • Level 5 Member
  • *****
  • Posts: 722
Re: Upgraded to 1.33NA but router still says 1.32NA
« Reply #2 on: April 14, 2010, 08:40:40 AM »
Hi,

Might also need to hard reset the unit before flashing.... in fact I had to hold the reset button in for some 30 seconds +/- and THEN re-flash for the 1.33 to take.... YMMV


SD1
Logged
DIR-655 A2, FW: 1.35NA

dirkpitt

  • Level 3 Member
  • ***
  • Posts: 157
Re: Upgraded to 1.33NA but router still says 1.32NA
« Reply #3 on: April 14, 2010, 05:48:24 PM »
I agree.  A factory reset may be in order... I was unable to flash to 1.34 successfully until I held the reset button down, and confirmed that the defaults were restored (personalized admin password was reset)...
Logged
DIR-655 H/W A4, Firmware 1.34NAb02 beta

kthaddock

  • Level 3 Member
  • ***
  • Posts: 263
Re: Upgraded to 1.33NA but router still says 1.32NA
« Reply #4 on: April 15, 2010, 07:45:27 AM »
1.32na is the same as 1.33na they only changed the version number
Logged
ASUS RT-N16  FW: DD-WRT v24 17140-vpn M NEWD-2 K2.6 -kong.
DIR-655 H/W: A3 FW: 1.31EUB02 This FW is working !
Never argue with a burk. They drag you down to their level and then beat you with experience
Di-624+ FW: 2.10

Mackerel

  • Level 3 Member
  • ***
  • Posts: 348
Re: Upgraded to 1.33NA but router still says 1.32NA
« Reply #5 on: April 15, 2010, 10:42:55 PM »
Quote from: kthaddock on April 15, 2010, 07:45:27 AM
1.32na is the same as 1.33na they only changed the version number

Well, I, for one, do not believe that... Must be more than that, or it would be a real waste of everyone's time.
Logged

dirkpitt

  • Level 3 Member
  • ***
  • Posts: 157
Re: Upgraded to 1.33NA but router still says 1.32NA
« Reply #6 on: April 16, 2010, 07:01:56 AM »
Quote from: kthaddock on April 15, 2010, 07:45:27 AM
1.32na is the same as 1.33na they only changed the version number
1.32NA had a lot of periodic reset issues if DNS Relay was enabled (for some users).

1.33NA was the fix for this.
Logged
DIR-655 H/W A4, Firmware 1.34NAb02 beta

terencec

  • Level 1 Member
  • *
  • Posts: 5
Re: Upgraded to 1.33NA but router still says 1.32NA
« Reply #7 on: April 18, 2010, 12:51:55 PM »
I had the same problem. You need to hard reset or reset to the factory settings before you flash the new firmware. Then it will work.
Logged