• November 01, 2024, 07:32:09 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Pages: 1 ... 3 4 [5] 6

Author Topic: DCS-930L severe hardware issue  (Read 116337 times)

evilslon

  • Level 2 Member
  • **
  • Posts: 34
Re: DCS-930L severe hardware issue
« Reply #60 on: January 21, 2014, 08:37:45 PM »
Quote from: jbwiv on January 21, 2014, 02:01:45 PM
...or should i simply give it a go with C98 and L6?...
I think yes, solder to C98 and L6

Quote from: jbwiv on January 21, 2014, 02:01:45 PM
...does it matter which side I solder to?...
Yes, this does matter, look at my picture and other pictures in this topic.
Logged

jbwiv

  • Level 1 Member
  • *
  • Posts: 6
Re: DCS-930L severe hardware issue
« Reply #61 on: January 22, 2014, 08:28:08 AM »
Great...thank you. I will give it another attempt. I appreciate your help! I will report back with my results. It will probably be the weekend before I can attempt it.
Logged

Jim1590

  • Level 1 Member
  • *
  • Posts: 21
Re: DCS-930L severe hardware issue
« Reply #62 on: March 01, 2014, 03:37:24 PM »
Opened up one of my cameras and was not able to get the solder to melt with my 30 w iron. So I tried hot glue! Only got a color bar test signal from the camera.

Removed the cap and camera working again. Maybe I only had one side fully connected.

Recommend those who try this, use some sort of solder pen, that may work easier for you.
Logged

photogd

  • Level 2 Member
  • **
  • Posts: 34
Re: DCS-930L severe hardware issue
« Reply #63 on: March 21, 2016, 10:01:13 AM »
Quote from: mommono on January 14, 2013, 01:02:22 PM
Okay, now both the the 930L, and the 932L is modded pr. tip from Freeride. IT WORKS!
PLEASE CONSIDER MAKING THIS A STICKY, MODERATOR!
Almost all the horizontal noise is gone. 
I cant believe dlink let so poor products out the door!
And people have been complaining over this this noise problem for so long, and then it turns out to be a poor product design, so easy to fix!

Anyway here is the mod done:
930L
http://www.facebook.com/photo.php?fbid=553762097968049&set=a.553598721317720.129413.100000027916196&type=3&theater

932L
http://www.facebook.com/photo.php?fbid=553762101301382&set=a.553598721317720.129413.100000027916196&type=3&theater

M :)

Bump because I need to do this and the pictures in the original thread are broken. Anyone can make a video or take pics?
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DCS-930L severe hardware issue
« Reply #64 on: March 21, 2016, 10:09:01 AM »
I suggest you send mommono a PM message on here to see if he's still around and can fix the face book links or content. These links are no longer working.
Let see if we can get a sticky made here in the forums with the correct content.


Quote from: photogd on March 21, 2016, 10:01:13 AM
Quote from: mommono on January 14, 2013, 01:02:22 PM
Okay, now both the the 930L, and the 932L is modded pr. tip from Freeride. IT WORKS!
PLEASE CONSIDER MAKING THIS A STICKY, MODERATOR!
Almost all the horizontal noise is gone. 
I cant believe dlink let so poor products out the door!
And people have been complaining over this this noise problem for so long, and then it turns out to be a poor product design, so easy to fix!

Anyway here is the mod done:
930L
http://www.facebook.com/photo.php?fbid=553762097968049&set=a.553598721317720.129413.100000027916196&type=3&theater

932L
http://www.facebook.com/photo.php?fbid=553762101301382&set=a.553598721317720.129413.100000027916196&type=3&theater

M :)

Bump because I need to do this and the pictures in the original thread are broken. Anyone can make a video or take pics?
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

photogd

  • Level 2 Member
  • **
  • Posts: 34
Re: DCS-930L severe hardware issue
« Reply #65 on: March 21, 2016, 08:10:27 PM »
Quote from: FurryNutz on March 21, 2016, 10:09:01 AM
I suggest you send mommono a PM message on here to see if he's still around and can fix the face book links or content. These links are no longer working.
Let see if we can get a sticky made here in the forums with the correct content.


Quote from: photogd on March 21, 2016, 10:01:13 AM
Quote from: mommono on January 14, 2013, 01:02:22 PM
Okay, now both the the 930L, and the 932L is modded pr. tip from Freeride. IT WORKS!
PLEASE CONSIDER MAKING THIS A STICKY, MODERATOR!
Almost all the horizontal noise is gone. 
I cant believe dlink let so poor products out the door!
And people have been complaining over this this noise problem for so long, and then it turns out to be a poor product design, so easy to fix!

Anyway here is the mod done:
930L
http://www.facebook.com/photo.php?fbid=553762097968049&set=a.553598721317720.129413.100000027916196&type=3&theater

932L
http://www.facebook.com/photo.php?fbid=553762101301382&set=a.553598721317720.129413.100000027916196&type=3&theater

M :)

Bump because I need to do this and the pictures in the original thread are broken. Anyone can make a video or take pics?

yes thank you a sticky would be nice
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DCS-930L severe hardware issue
« Reply #66 on: March 22, 2016, 06:40:36 AM »
If we can get a hold of the OP who has the corrective information...
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

photogd

  • Level 2 Member
  • **
  • Posts: 34
Re: DCS-930L severe hardware issue
« Reply #67 on: March 23, 2016, 01:36:48 PM »
Quote from: evilslon on January 21, 2014, 08:37:45 PM
Quote from: jbwiv on January 21, 2014, 02:01:45 PM
...or should i simply give it a go with C98 and L6?...
I think yes, solder to C98 and L6

Quote from: jbwiv on January 21, 2014, 02:01:45 PM
...does it matter which side I solder to?...
Yes, this does matter, look at my picture and other pictures in this topic.

Well, I was unable to get the solder to stick so I used hot glue. My board also only has C98 and L6. I used a 470uf 10v because the place I ordered the capacitor from sent me 10v by mistake instead of 6.3v.

With that capacitor installed to those points, I get no picture at all from the camera. Remove it, picture returns.

Do you think it's because of the 10v instead of 6.3v, or do you think the C98 and L6 are not really correct?

Also, do you have any tips on using the solder?
« Last Edit: March 23, 2016, 01:54:41 PM by photogd »
Logged

photogd

  • Level 2 Member
  • **
  • Posts: 34
Re: DCS-930L severe hardware issue
« Reply #68 on: March 23, 2016, 01:59:06 PM »
My understanding is that the 10v on the capacitor is more of a maximum, so that shouldn't matter. So maybe C98 and L6 are incorrect?  But they are in the same spot as  C39 and L8 in the original instructions. So I am confused.

I did do minus and plus correctly, so it's not that either.
Logged

photogd

  • Level 2 Member
  • **
  • Posts: 34
Re: DCS-930L severe hardware issue
« Reply #69 on: March 24, 2016, 02:30:25 AM »
I actually figured it out, fixed my camera.

Because the steps in this thread aren't totally clear and a lot of pictures are missing, I made a YouTube video for anyone that wants to do this fix. Maybe a mod can put my video in the sticky?

https://youtu.be/haLfYZp0glw

Logged

mommono

  • Level 2 Member
  • **
  • Posts: 26
Re: DCS-930L severe hardware issue
« Reply #70 on: March 24, 2016, 07:00:04 AM »
I am sorry for the nonworking links. Facebook changed the setting from "public" to "friends". Should work now.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DCS-930L severe hardware issue
« Reply #71 on: March 24, 2016, 07:04:35 AM »
Thanks Mommono,

If you could possibly update this thread with a step by step guide and be as detailed as possible, it would be greatful. Then we can move this to a FAQ section for central use for everyone.

Thank you.

Quote from: mommono on March 24, 2016, 07:00:04 AM
I am sorry for the nonworking links. Facebook changed the setting from "public" to "friends". Should work now.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

mommono

  • Level 2 Member
  • **
  • Posts: 26
Re: DCS-930L severe hardware issue
« Reply #72 on: March 24, 2016, 07:05:58 AM »
Links SHOULD work now. Notify me if they dont, please.


Quote from: photogd on March 21, 2016, 10:01:13 AM
Quote from: mommono on January 14, 2013, 01:02:22 PM
Okay, now both the the 930L, and the 932L is modded pr. tip from Freeride. IT WORKS!
PLEASE CONSIDER MAKING THIS A STICKY, MODERATOR!
Almost all the horizontal noise is gone. 
I cant believe dlink let so poor products out the door!
And people have been complaining over this this noise problem for so long, and then it turns out to be a poor product design, so easy to fix!

Anyway here is the mod done:
930L
http://www.facebook.com/photo.php?fbid=553762097968049&set=a.553598721317720.129413.100000027916196&type=3&theater

932L
http://www.facebook.com/photo.php?fbid=553762101301382&set=a.553598721317720.129413.100000027916196&type=3&theater

M :)

Bump because I need to do this and the pictures in the original thread are broken. Anyone can make a video or take pics?
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DCS-930L severe hardware issue
« Reply #73 on: March 24, 2016, 07:55:51 AM »
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

rstark18

  • Level 3 Member
  • ***
  • Posts: 140
Re: DCS-930L severe hardware issue
« Reply #74 on: April 01, 2016, 12:38:58 AM »
I finally got around to fixing the low light noise issue with a few of my 930L's. Here is my step by step.

Squeeze the case at the top and bottom and the clip on upper side will be exposed. Slide something thin in that spot to keep it open. then working down and around with a pry tool. It's easiest to pry the bottom of the case out to release the clips.
High resolution pic: https://dl.dropboxusercontent.com/u/53532923/Dlink/2016-03-29_IMG_2748.JPG


Case apart.
High resolution pic: https://dl.dropboxusercontent.com/u/53532923/Dlink/2016-03-29_IMG_2749.JPG
High resolution pic:https://dl.dropboxusercontent.com/u/53532923/Dlink/2016-03-29_IMG_2750.JPG





These are the capacitors I bought from Amazon.
High resolution pic: https://dl.dropboxusercontent.com/u/53532923/Dlink/2016-03-29_IMG_2761.JPG


Identify where new capacitor will connect. Negative lead to lower side of C39. Positive lead to upper side of L8
High resolution pic: https://dl.dropboxusercontent.com/u/53532923/Dlink/2016-03-29_IMG_2755.JPG


Bend capacitor leads so they connect with the board capacitors C39 and L8.
High resolution pic: https://dl.dropboxusercontent.com/u/53532923/Dlink/2016-03-29_IMG_2784.JPG
High resolution pic: https://dl.dropboxusercontent.com/u/53532923/Dlink/2016-03-29_IMG_2790.JPG
High resolution pic: https://dl.dropboxusercontent.com/u/53532923/Dlink/2016-03-30_IMG_2807.JPG






Make sure leads will connect to board.
High resolution pic: https://dl.dropboxusercontent.com/u/53532923/Dlink/2016-03-30_IMG_2806.JPG


Hot glue capacitor in place to make sure it doesn't move during soldering. Added a very small dab of flux for a good solder joint.
High resolution pic: https://dl.dropboxusercontent.com/u/53532923/Dlink/2016-03-31_IMG_2809.JPG


Soldered on. Careful not to bridge anything when soldering. Cleaned area (flux residue) with alcohol and a q-tip.
High resolution pic: https://dl.dropboxusercontent.com/u/53532923/Dlink/2016-03-31_IMG_2810.JPG
« Last Edit: April 01, 2016, 10:47:55 AM by rstark18 »
Logged
Pages: 1 ... 3 4 [5] 6
« previous next »