Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[dammad]

Okay, installed the 29-Mar v1.02 firmware. Previously on the original v1.00, if that matters. Two observations. The web login screen sometimes response with "error, wrong password," but either re-entering or just pressing the button again, will get me in.

That's the same for me..
No problem with FW 1.00 and 1.01

[AmiGaGa]

Hi,
Please also include Samsung TV UE46EH6030W [No content of any type accessible. Has never worked on v1.0, v1.01 or v1.02]

Perhaps not the good thread but it was the same on my "old" DNS-320 with every firmware 2.xx

[JavaLawyer]

Hi,
Please also include Samsung TV UE46EH6030W [No content of any type accessible. Has never worked on v1.0, v1.01 or v1.02]

Perhaps not the good thread but it was the same on my "old" DNS-320 with every firmware 2.xx

Thanks. . . I'll pass this along.

[yamboy]

That's the same for me..
No problem with FW 1.00 and 1.01

me too.

[AmiGaGa]

Hello,

on Samsung UE40C6000, DLNA works well with FW 1.01 (but not perfect, i have a error message on the TV when i want to turn back on main menu - Picture/Music/Video)
With 1.02 => no files appears, even if i refresh all/one by one folders on the NAS.

[JavaLawyer]

Hello,

on Samsung UE40C6000, DLNA works well with FW 1.01 (but not perfect, i have a error message on the TV when i want to turn back on main menu - Picture/Music/Video)
With 1.02 => no files appears, even if i refresh all/one by one folders on the NAS.

Thanks. . . Passing this on.

[mellda]

I'm disappointed guys. I intalled the new version but I seems too buggy.

1. I can't plan s.m.a.r.t. check:
    - Management -> Disk Management -> S.M.A.R.T. Test -> S.M.A.R.T. Test:
When I check "Send Result By E-mail" it shows me the warning message "Failed Email setting. Please check your setting at System Management -> Email Alerts". But I set it right. Whent I click on the link "Email Alerts" in the warning message, it redirects me to Management -> System Management -> Notifications -> Email Settings. I check the setting and test it again. It shows me that it is ok and I receive the testing email. So I save it again, go to the S.M.A.R.T. menu again but there is the same error all the time. Additionally I checked "Send The S.M.A.R.T. Test Result" in Notification -> EventSettings but still the same.
    - Management -> Disk Management -> S.M.A.R.T. Test -> S.M.A.R.T. Test:
I can't see the table with the list of hard drives, so I can't check them. It is not possible to create Schedule when the hard drives are not selected. It shows me error message "Please select a hard drive."
How can I set the S.M.A.R.T. check??

2. Management -> System status -> System Info -> Device Information:
Instead of temperature, there is the text "undefined".
Where can I check the temperature??

3. Management -> System status -> Hard Drive Info:
When I click on the Hard Drive Info button, the rotating circle appears and stayed there forever.
Where can I find Hard Drive Info information??

4. When I log in, I must do it two times becouse for the first time, it tells me I have wrong password.
It is not problem for me. I doesn't log in very often and if so, I can live with it.

There are not these issues int the previous version (1.01). When I found out the new version of the firmware doesn't work, I restart the setting to the default values. It doesn't help.

On the other hand, the firmware is noticeably qucker and I can see some additional options, which I appreciate guys. But it is not usable for me the NAS now. I need to set the S.M.A.R.T. check at least. Could you tell me, how to do it? If not I will return it back to the shop. I have it third day and it is not problem to get rid of it.

//edited

[JavaLawyer]

Can other members please validate/replicate these observations?
Thanks!

I'm disappointed guys. I intalled the new version but I seems too buggy.

1. I can't plan s.m.a.r.t. check:
    - Management -> Disk Management -> S.M.A.R.T. Test -> S.M.A.R.T. Test:
When I check "Send Result By E-mail" it shows me the warning message "Failed Email setting. Please check your setting at System Management -> Email Alerts". But I set it right. Whent I click on the link "Email Alerts" in the warning message, it redirects me to Management -> System Management -> Notifications -> Email Settings. I check the setting and test it again. It shows me that it is ok and I receive the testing email. So I save it again, go to the S.M.A.R.T. menu again but there is the same error all the time. Additionally I checked "Send The S.M.A.R.T. Test Result" in Notification -> EventSettings but still the same.
    - Management -> Disk Management -> S.M.A.R.T. Test -> S.M.A.R.T. Test:
I can't see the table with the list of hard drives, so I can't check them. It is not possible to create Schedule when the hard drives are not selected. It shows me error message "Please select a hard drive."
How can I set the S.M.A.R.T. check??

2. Management -> System status -> System Info -> Device Information:
Instead of temperature, there is the text "undefined".
Where can I check the temperature??

3. Management -> System status -> Hard Drive Info:
When I click on the Hard Drive Info button, the rotating circle appears and stayed there forever.
Where can I find Hard Drive Info information??

4. When I log in, I must do it two times becouse for the first time, it tells me I have wrong password.
It is not problem for me. I doesn't log in very often and if so, I can live with it.

There are not these issues int the previous version (1.01). When I found out the new version of the firmware doesn't work, I restart the setting to the default values. It doesn't help.

On the other hand, the firmware is noticeably qucker and I can see some additional options, which I appreciate guys. But it is not usable for me the NAS now. I need to set the S.M.A.R.T. check at least. Could you tell me, how to do it? If not I will return it back to the shop. I have it third day and it is not problem to get rid of it.

//edited

[itsme1st]

Simple question:
Is there any How-to-update-firmware?
I couldn't found one...

Thank you.

[ipubi15]

Can other members please validate/replicate these observations?
Thanks!

I'm having the same problems here.

How do i can go back to the previous firmware? i've tried and no change was made

[JavaLawyer]

Simple question:
Is there any How-to-update-firmware?
I couldn't found one...

Thank you.

DNS ShareCenter - Upgrading ShareCenter Firmware

[JavaLawyer]

I'm having the same problems here.

You've replicate all four of the bullet points listed by mellda? 

[ipubi15]

You've replicate all four of the bullet points listed by mellda? 

i've had the 2,3 and 4 problems. So, i've already removed the firmware before even try to test the nš1 problem listed

[JavaLawyer]

Before sending this off to D-Link can one additional member please attempt to replicate (I already have the OP and one additional person)

Thanks! 

I'm disappointed guys. I intalled the new version but I seems too buggy.

1. I can't plan s.m.a.r.t. check:
    - Management -> Disk Management -> S.M.A.R.T. Test -> S.M.A.R.T. Test:
When I check "Send Result By E-mail" it shows me the warning message "Failed Email setting. Please check your setting at System Management -> Email Alerts". But I set it right. Whent I click on the link "Email Alerts" in the warning message, it redirects me to Management -> System Management -> Notifications -> Email Settings. I check the setting and test it again. It shows me that it is ok and I receive the testing email. So I save it again, go to the S.M.A.R.T. menu again but there is the same error all the time. Additionally I checked "Send The S.M.A.R.T. Test Result" in Notification -> EventSettings but still the same.
    - Management -> Disk Management -> S.M.A.R.T. Test -> S.M.A.R.T. Test:
I can't see the table with the list of hard drives, so I can't check them. It is not possible to create Schedule when the hard drives are not selected. It shows me error message "Please select a hard drive."
How can I set the S.M.A.R.T. check??

2. Management -> System status -> System Info -> Device Information:
Instead of temperature, there is the text "undefined".
Where can I check the temperature??

3. Management -> System status -> Hard Drive Info:
When I click on the Hard Drive Info button, the rotating circle appears and stayed there forever.
Where can I find Hard Drive Info information??

4. When I log in, I must do it two times becouse for the first time, it tells me I have wrong password.
It is not problem for me. I doesn't log in very often and if so, I can live with it.

There are not these issues int the previous version (1.01). When I found out the new version of the firmware doesn't work, I restart the setting to the default values. It doesn't help.

On the other hand, the firmware is noticeably qucker and I can see some additional options, which I appreciate guys. But it is not usable for me the NAS now. I need to set the S.M.A.R.T. check at least. Could you tell me, how to do it? If not I will return it back to the shop. I have it third day and it is not problem to get rid of it.

//edited

[itsme1st]

DNS ShareCenter - Upgrading ShareCenter Firmware

Thank you, JavaLawyer. Found it, meanwhile. It was far too simple 
Anyway: great support. Big THANKS to You!!