D-Link Forums
The Graveyard - Products No Longer Supported => D-Link Storage => DNS-320L => Topic started by: JavaLawyer on May 23, 2013, 09:05:26 AM
-
D-Link released firmware version 1.02b07 for the DNS-320L hardware versions A1, A2, and A3. :)
- mydlink.com/support (http://mydlink.com/support)
-
Please post your comments and observations here!!! ;) :) ;)
-
The published release notes are now updated to reflect the changes in firmware version 1.02b07:
DNS-320L - Cumulative Firmware Release Notes (http://forums.dlink.com/index.php?topic=51629.0)
-
Installed fine for me.
The only thing I've noticed so far is the ability to refresh a multimedia share, rather than having to refresh every share which I've had to do in the past. I don't think this is covered in the release notes.
The smart tv fix I'm yet to test but am happy to see has been tackled as this was a big limitation for me.
-
Disappointingly I still can't browse my content on the Samsung smart tv. It still shows no content in the root music/videos/photos folders.
-
Disappointingly I still can't browse my content on the Samsung smart tv. It still shows no content in the root music/videos/photos folders.
I had the same problem. You need to add the folders in the UPnP av server settings under application management.
-
D-Link released firmware version 1.02b07 for the DNS-320L hardware versions A1, A2, and A3. :)
- D-Link Taiwan (http://tsd.dlink.com.tw/)
Can't find 1.02b07 anywhere? looks like its been removed?
Firmware Firmware: DNS-320L A1 FW V1.00b08 30.19 MB .
Firmware Firmware:DNS-302L A2 FW V1.01b02(for WW) 30.32 MB .
Firmware Firmware:DNS-320L A3 FW V1.02 (for WW) 40.02 MB .
Firmware Firmware:DNS-320LW A1 FW V1.01b02(for WW) 30.32 MB .
Firmware Software: DNS-320L A3 setup Wizard for MacV1.0.2.2 3.39 MB .
Firmware Software:DNS-320L A1 Iphone APP V1.00 2.26 MB .
Firmware Software:DNS-320L A1 Language packs V1.00(DI) 455.35 KB .
Firmware Software:DNS-320L A1 Language Packs_V1.00 595.02 KB .
Firmware Software:DNS-320L A1 PnP-X Driver v1.00 797.62 KB .
Firmware Software:DNS-320L A1 Setup wizard v.1.0.0.0(DI) 69.69 MB .
Firmware Software:DNS-320L A1 Setup Wizard v1.0.0.0 (MAC) 48.71 MB .
Firmware Software:DNS-320L A1 Setup Wizard V1.0.0.0 for MAC 3.93 MB .
Firmware Software:DNS-320L A1 Setup Wizard v1.0.0.0(CA) 69.65 MB .
Firmware Software:DNS-320L A1 Setup Wizard v1.0.0.0(EU) 69.8 MB .
Firmware Software:DNS-320L A2 Android_App_v1.0.1 (for WW) 1.35 MB .
Firmware Software:DNS-320L A2 DNS-320LW A1 Andriod v1.0.2 1.4 MB .
Firmware Software:DNS-320L A2 DNS-320LW iOS app v1.1.1 4.45 MB .
Firmware Software:DNS-320L A2 iPhone_App_v1.1.0(for WW) 2.32 MB .
Firmware Software:DNS-320L A2 Setup Wizard 1.0.1.0 for MAC 68 KB .
Firmware Software:DNS-320L A2 Utility for Mac 67 KB .
Firmware Software:DNS-320L A3 Setup Wizard V1.0.2.1 for MAC 2.19 MB .
Firmware Software:DNS-320L A3 setup Wizard V1.0.2.3 (CA) 69.28 MB .
Firmware Software:DNS-320L A3 setup Wizard V1.0.2.3 (DI) 69.32 MB .
Firmware Software:DNS-320L A3 setup Wizard V1.0.2.3 (EU) 69.43 MB .
Firmware Software:DNS-320L A3 Setup wizard v1.0.2.3 (for CN 70.61 MB .
Firmware Software:DNS-320L_A1_Storage Utility_V5.1.0.3 3.95 MB .
Manual/ QIG Manual:DNS-320L A1 FW v1.00 Manual v1.0(for WW) 35.57 MB .
Manual/ QIG Manual:DNS-320L A1 Manual V1.00(CN) 35.31 MB .
Manual/ QIG Manual:DNS-320L A2 Manual V1.10 (for CN) 5.71 MB .
Manual/ QIG Manual:DNS-320L A3 manual V1.20(CN) 35.1 MB .
Manual/ QIG QIG:DNS-320L A1 QIG V1.00(TW) 5.82 MB .
Manual/ QIG QIG:DNS-320L A1 FW v1.00 QIG v1.00(for DI) 866.5 KB .
Manual/ QIG QIG:DNS-320L A1 FW v1.00 QIG v1.00(for EU) 1.62 MB .
Manual/ QIG QIG:DNS-320L A1 QIG V1.00(NA) 379.97 KB .
Manual/ QIG QIG:DNS-320L A1 QIG V1.10 (EU) 1.65 MB .
Manual/ QIG User Manaul: DNS-320L A1 Manual V1.00(DE) 35.64 MB .
Manual/ QIG User Manual:DNS-320L A1 Manual V1.00(ES) 35.61 MB .
Manual/ QIG User Manual:DNS-320L A1 Manual V1.00(FR) 35.7 MB .
Manual/ QIG User Manual:DNS-320L A1 Manual V1.00(IT) 459.59 KB .
Manual/ QIG User Manual:DNS-320L A1 Manual V1.00(PT) 461.78 KB .
GPL Source Code GPL:DNS-320L A1 GPL Source code(for WW) 868.11 MB .
Back
-
http://tsd.dlink.com.tw/downloads2008detailgo.asp
it's under "Firmware:DNS-320L A3 FW V1.02 (for WW)"
in the release notes :
"Firmware: 1.02
Hardware: DNS-320L A1/A2/A3
DNS-320LW A1/A2
Date: 2013/5/8
"
bye
-
I had the same problem. You need to add the folders in the UPnP av server settings under application management.
I refreshed an existing uPnP folder containing my video content after updating. I'd have thought that would have been enough, but still couldn't see anything.
-
http://tsd.dlink.com.tw/downloads2008detailgo.asp
it's under "Firmware:DNS-320L A3 FW V1.02 (for WW)"
in the release notes :
"Firmware: 1.02
Hardware: DNS-320L A1/A2/A3
DNS-320LW A1/A2
Date: 2013/5/8
"
bye
Correct. The name of the FW in the ZIP archive is v1.02b07
-
Update: D-Link posted DNS-320 firmware v2.0 on the mydlink site: mydlink.com/support (http://mydlink.com/support)
-
Hi,
I have a serious problem. I installed firmware version 1.02 but had to realize that the UpN Server did no longer work with my Samsung TV. So I tried to switch back to firmware version 1.01b03, but something went awfully wrong. The green update circle is rotating forever and does not stop!
Please help!
Regards
alzi
-
Thanks god, I pulled the plug and started new. After a while the system came up with FW 1.01 and the UpN server worked again with my Samsung TV. Lesson learned: Never change a running system!
alzi
-
same problem here with a Philips TV, upgraded to 1.02, UPnP server folders empty, deleted, created again, nothing to do, downgraded to 1.01 FW and everything works again.
Made this process two times, same results, no success with FW 1.02
>:(
-
same issue with smart tv 69 and 55 series
i get a popup error on tv about the connection to the nas
also lost the possibility to pass through 3dy party application like iMediaShare or others...
fw reports this date : 03/29/2013
-
I will escalate this UPnP issue to D-Link. :-\
same issue with smart tv 69 and 55 series
i get a popup error on tv about the connection to the nas
also lost the possibility to pass through 3dy party application like iMediaShare or others...
fw reports this date : 03/29/2013
same problem here with a Philips TV, upgraded to 1.02, UPnP server folders empty, deleted, created again, nothing to do, downgraded to 1.01 FW and everything works again.
Made this process two times, same results, no success with FW 1.02
>:(
Thanks god, I pulled the plug and started new. After a while the system came up with FW 1.01 and the UpN server worked again with my Samsung TV. Lesson learned: Never change a running system!
Hi,
I have a serious problem. I installed firmware version 1.02 but had to realize that the UpN Server did no longer work with my Samsung TV. So I tried to switch back to firmware version 1.01b03, but something went awfully wrong. The green update circle is rotating forever and does not stop!
Please help!
Regards
alzi
-
I just upgraded my DNS-320L to the latest firmware 1.02b07 but found a major problem with upnp av server.
My Sony BDP-S790 seems to be able to connect to the NAS but impossible to get folder/files list anymore...
I restarted everything ... same issue. I was not able to make it work with the latest firmware.
So I reverted it back to v1.01 (fortunately it is possible).
-
I just upgraded my DNS-320L to the latest firmware 1.02b07 but found a major problem with upnp av server.
My Sony BDP-S790 seems to be able to connect to the NAS but impossible to get folder/files list anymore...
I restarted everything ... same issue. I was not able to make it work with the latest firmware.
So I reverted it back to v1.01 (fortunately it is possible).
Thanks. I've escalated this issue to D-Link (as per my prior post) so they can address.
-
D-Link provided a procedure addressing the UPnP issues reported by users using DNS-320L firmware version 1.02b07: Firmware v1.02b07 and UPnP [FIX] (http://forums.dlink.com/index.php?topic=54300.0)
-
I have upgraded to 1.02b07 all looks fine.
Yes, after the firmware upgrade I have to manually run the refresh all in order my Panasonic Smart TV can list out all the supported media files.
Thanks Java for the quick response.
Thank you.
-
I have upgraded to 1.02b07 all looks fine.
Yes, after the firmware upgrade I have to manually run the refresh all in order my Panasonic Smart TV can list out all the supported media files.
Thanks Java for the quick response.
Thank you.
Thanks for reporting back!
I'm glad the solution works for you. ;)
-
It works, :) :) :) :)
thanks Java
Hugs
-
It works, :) :) :) :)
thanks Java
Hugs
Great to hear that UPnP is working for you now!
can other members please validate the UPnP fix?
Thanks!
-
Okay, installed the 29-Mar v1.02 firmware. Previously on the original v1.00, if that matters. Two observations. The web login screen sometimes response with "error, wrong password," but either re-entering or just pressing the button again, will get me in. I'm using just one 2Tb Green WD drive, about 20% used. So as suggested, did a refresh for UPandP in the Video and Music directories. The Music directory can't finished, stuck at 40%.
Regards, drc
-
how much time do i have to expect to wait for in order to have the share refreshed?
after 30mins it was still at 2% saying "Initializing" ..... :(
not really confident....
sqldb process al 100%..
thx
-
how much time do i have to expect to wait for in order to have the share refreshed?
after 30mins it was still at 2% saying "Initializing" ..... :(
not really confident....
sqldb process al 100%..
thx
The more files in the folder, the longer it will take. I recommend testing the refresh on a share containing only a handful of files to see if it's working before refreshing shares with a lot of content.
-
yes...
just back after refreshed a small folder.
now refreshing a bigger one, waiting for completion....
after that will restart the upnp server and back to post about the service with my smart tv... x the fingers..
thx J
-
Hello,
I upgraded to FW 1.02 and refreshed the UPnP Folders. There are two, one with videos and anothher one with pictures in several subfolders. I checked with my Samsung TV, actually the NAS is connected via Powerline with a Samsung blue-ray player that connects to the Samsung TV via HDMI. The videos were accesible at once - good. With the pictures it was a slightly different story. I had the choice to select subfolders or all pictures. To get to the subfolder list was only possible after several trials, mostly the Samsung system told it could not access them. When I checked all pictures they were accessible though it took some time to get the list transferred. Also, I realized that the fan of the NAS was on much more often, though NAS was basically inactive. I switched back to version 1.01 again, where the problems described do not exist.
To me FW version 1.02 shows no progress compared to 1.01.
alzi
-
Hi,
I'm bought DNS-320L to stream movies, music and photos all over my home network especially my TV LG LW5500 from 2011 as a network player compatible with DLNA standard.
This is total disaster...
All my electronic devices which are DLNA players (TV LG LW5500 from 2011, Tablet with And 4.1 and Samsung GSII with And 4.0 (by Total Commander or Home Media apps)) are not able to play, but even see only few folders with media (all devices see the same folders (about 5% of all enabled folders))
Only Yamaha VCR 671 could play music.
Total Commander see and can open doc. and pdf. fails but that's all. Nothing more.
Now I upgraded FW to 1.02 and like with 1.00, 1.01 there is no progress. Even worse because Yamaha VCR 671 has "denied access" to NAS...
Of course I refresh shares in Applications Management/ Multimedia Services/Multimedia Shares Setting and on of course I enabled UPNP AV server.
Of course I contacted my local DLink services but they told me that they have no access to LG LW series TW and they can't check.
I have checked many forums worldwide and found out that there are a lot of people suffering the same problems.
Is there any chance to improve DNS-320L's cooperation by DLNA or do we have to buy Synology...
This is my first post and could anybody let me know how to pass this case to the producer?
Regards, Michal
-
you can try to install fun_plug and one of the alternative dlna/upnap-av servers (minidlna, twonky etc), but obviously this problem should be solved by dlink, not by unsupported addons
-
hummm bad story....
it seems new fw is less compatible than the older in terms of upnp/dlna
after succesfully refreshed the multimedia library i'm still experiencing the denied access issue from the tv (samsung ps51d6900) to the nas and then no files are listed.
the only way to access the media is using zappotv app connecting the nas via windows share and push the files to the tv... not so happy with this solution.
will try again and again but i think i will revert back to the old release
bfn
-
it's the same for me..
i refreshed all the volume_1, but samsung tv (D7000) and samsung blurayplayer (D5500) don't access to the nas library..
-
Refreshed all my shares over the weekend in the hope of getting content available on my Smart TV (Samsung UE46ES5500) and still no luck.
This never worked before or after the firmware update but after reading the notes for the fix I thought I'd go through the motions of the full refresh in case it kicked it into life but still nothing.
I'd be a very disappointed owner if I didn't also have the PS3.
-
Just so we're all on the same page, what devices have DNS-320L owners tested that do NOT work with DLNA/UPnP?
Let's assemble a list and I'll pass it along. ;)
-
I make a start, Alzi
UPnP Devices not working under FW 1.02
Device Bug
Samsung BD-E5200 Picture Subfolders cannot be opened
-
dAmmAd
UPnP Devices not working under FW 1.02 (ok with 1.0 and 1.01)
Devices
Samsung BD-D5500
Samsung TV D7000
Bug
Devices access to nas, but can't open media library (Can't run Media play, or something similar..)
-
Just so we're all on the same page, what devices have DNS-320L owners tested that do NOT work with DLNA/UPnP on FW v1.02? Let's compile a list.
Here's what we have so far:
- Samsung BD-D5500 [Unable to play content; Not working with FW v1.02, but works w/ FW v1.0 & 1.01]
- Samsung BD-E5200 [Pictures in subfolders won't open]
- Samsung TV D7000 [Unable to play content; Not working with FW v1.02, but works w/ FW v1.0 & 1.01]
dAmmAd
UPnP Devices not working under FW 1.02 (ok with 1.0 and 1.01)
Devices
Samsung BD-D5500
Samsung TV D7000
Bug
Devices access to nas, but can't open media library (Can't run Media play, or something similar..)
I make a start, Alzi
UPnP Devices not working under FW 1.02
Device Bug
Samsung BD-E5200 Picture Subfolders cannot be opened
-
samsung tv ps51d6900
"failed to access the device. please check the device and retry" messagebox, and then "there is no video file currently available" message. No files under catergory Photo, Music, Video
worked fine with release 1.01
-
Just so we're all on the same page, what devices have DNS-320L owners tested that do NOT work with DLNA/UPnP on FW v1.02? Let's compile a list.
Here's what we have so far:
- Samsung BD-D5500 [Unable to play content; Not working with FW v1.02, but works w/ FW v1.0 & 1.01]
- Samsung BD-E5200 [Pictures in subfolders won't open]
- Samsung TV D7000 [Unable to play content; Not working with FW v1.02, but works w/ FW v1.0 & 1.01]
- Samsung TV PS51D6900 [No video files currently available message, worked with FW 1.01]
-
Just so we're all on the same page, what devices have DNS-320L owners tested that do NOT work with DLNA/UPnP on FW v1.02? Let's compile a list.
Here's what we have so far:
- Samsung BD-D5500 [Unable to play content; Not working with FW v1.02, but works w/ FW v1.0 & 1.01]
- Samsung BD-E5200 [Pictures in subfolders won't open]
- Samsung TV D7000 [Unable to play content; Not working with FW v1.02, but works w/ FW v1.0 & 1.01]
- Samsung TV PS51D6900 [No video files currently available message, worked with FW 1.01]
Please include:
Samsung TV ES5500 [No content of any type accessible. Has never worked on v1.0, v1.01 or v1.02]
Additionally, since refreshing my content I can't even browse it any more via the Playstation. This has been an occasional issue in the past, and re-listing the media servers on the PS3 has fixed it. I tried this 4 times in succession yesterday and still couldn't browse my content. It may still be an intermittent thing but failing to connect four times in a row is unprecedented for me so I fear the worst at the moment.
-
Please include:
Samsung TV ES5500 [No content of any type accessible. Has never worked on v1.0, v1.01 or v1.02]
Additionally, since refreshing my content I can't even browse it any more via the Playstation. This has been an occasional issue in the past, and re-listing the media servers on the PS3 has fixed it. I tried this 4 times in succession yesterday and still couldn't browse my content. It may still be an intermittent thing but failing to connect four times in a row is unprecedented for me so I fear the worst at the moment.
Added...
-
Just so we're all on the same page, what devices have DNS-320L owners tested that do NOT work with DLNA/UPnP on FW v1.02? Let's compile a list.
Here's what we have so far:
- Samsung BD-D5500 [Unable to play content; Not working with FW v1.02, but works w/ FW v1.0 & 1.01]
- Samsung BD-E5200 [Pictures in subfolders won't open]
- Samsung TV ES5500 [No content; Has worked w/ v1.0, v1.01 or v1.02]
- Samsung TV D7000 [Unable to play content; Not working with FW v1.02, but works w/ FW v1.0 & 1.01]
- Samsung TV PS51D6900 [No video files currently available message, worked with FW 1.01]
-
I see a general pattern emerging here (i.e. all Samsung devices).
I've forwarded the list to D-Link.
-
I got a different issue:
I've got a revision A1.
I tried to refresh the firmware, displayed it was successful, than after reboot
There was a pop-up
'Step 5: Formating your harddrive(s)'
I hit an Exit, I wasn't sure I wanted to loose every data. However there were no warning.
Since than seem like I'm a middle of nowhere.
I'm able to manage the device, but the old 1.00 firmware version is displayed, I can not access the files as a network drive, and of course DLNA function is gone.
Is there a hard reset option, becouse if I want to restart the device, it's prevents me, bacouse of firmware update/formating.
Any ideas what to do?
-
I got a different issue:
I've got a revision A1.
I tried to refresh the firmware, displayed it was successful, than after reboot
There was a pop-up
'Step 5: Formating your harddrive(s)'
I hit an Exit, I wasn't sure I wanted to loose every data. However there were no warning.
Since than seem like I'm a middle of nowhere.
I'm able to manage the device, but the old 1.00 firmware version is displayed, I can not access the files as a network drive, and of course DLNA function is gone.
Is there a hard reset option, becouse if I want to restart the device, it's prevents me, bacouse of firmware update/formating.
Any ideas what to do?
For a reset to the factory default settings, While the DNS-320L is powered up, press and hold the reset button on the rear of the unit for > 8 seconds. This will erase all user settings, but should not impact HDD formatting and data.
-
Okay, installed the 29-Mar v1.02 firmware. Previously on the original v1.00, if that matters. Two observations. The web login screen sometimes response with "error, wrong password," but either re-entering or just pressing the button again, will get me in.
That's the same for me..
No problem with FW 1.00 and 1.01
-
Hi,
Please also include Samsung TV UE46EH6030W [No content of any type accessible. Has never worked on v1.0, v1.01 or v1.02]
Perhaps not the good thread but it was the same on my "old" DNS-320 with every firmware 2.xx
-
Hi,
Please also include Samsung TV UE46EH6030W [No content of any type accessible. Has never worked on v1.0, v1.01 or v1.02]
Perhaps not the good thread but it was the same on my "old" DNS-320 with every firmware 2.xx
Thanks. . . I'll pass this along.
-
That's the same for me..
No problem with FW 1.00 and 1.01
me too.
-
Hello,
on Samsung UE40C6000, DLNA works well with FW 1.01 (but not perfect, i have a error message on the TV when i want to turn back on main menu - Picture/Music/Video)
With 1.02 => no files appears, even if i refresh all/one by one folders on the NAS.
-
Hello,
on Samsung UE40C6000, DLNA works well with FW 1.01 (but not perfect, i have a error message on the TV when i want to turn back on main menu - Picture/Music/Video)
With 1.02 => no files appears, even if i refresh all/one by one folders on the NAS.
Thanks. . . Passing this on.
-
I'm disappointed guys. I intalled the new version but I seems too buggy.
1. I can't plan s.m.a.r.t. check:
- Management -> Disk Management -> S.M.A.R.T. Test -> S.M.A.R.T. Test:
When I check "Send Result By E-mail" it shows me the warning message "Failed Email setting. Please check your setting at System Management -> Email Alerts". But I set it right. Whent I click on the link "Email Alerts" in the warning message, it redirects me to Management -> System Management -> Notifications -> Email Settings. I check the setting and test it again. It shows me that it is ok and I receive the testing email. So I save it again, go to the S.M.A.R.T. menu again but there is the same error all the time. Additionally I checked "Send The S.M.A.R.T. Test Result" in Notification -> EventSettings but still the same.
- Management -> Disk Management -> S.M.A.R.T. Test -> S.M.A.R.T. Test:
I can't see the table with the list of hard drives, so I can't check them. It is not possible to create Schedule when the hard drives are not selected. It shows me error message "Please select a hard drive."
How can I set the S.M.A.R.T. check??
2. Management -> System status -> System Info -> Device Information:
Instead of temperature, there is the text "undefined".
Where can I check the temperature??
3. Management -> System status -> Hard Drive Info:
When I click on the Hard Drive Info button, the rotating circle appears and stayed there forever.
Where can I find Hard Drive Info information??
4. When I log in, I must do it two times becouse for the first time, it tells me I have wrong password.
It is not problem for me. I doesn't log in very often and if so, I can live with it.
There are not these issues int the previous version (1.01). When I found out the new version of the firmware doesn't work, I restart the setting to the default values. It doesn't help.
On the other hand, the firmware is noticeably qucker and I can see some additional options, which I appreciate guys. But it is not usable for me the NAS now. I need to set the S.M.A.R.T. check at least. Could you tell me, how to do it? If not I will return it back to the shop. I have it third day and it is not problem to get rid of it.
//edited
-
Can other members please validate/replicate these observations?
Thanks!
I'm disappointed guys. I intalled the new version but I seems too buggy.
1. I can't plan s.m.a.r.t. check:
- Management -> Disk Management -> S.M.A.R.T. Test -> S.M.A.R.T. Test:
When I check "Send Result By E-mail" it shows me the warning message "Failed Email setting. Please check your setting at System Management -> Email Alerts". But I set it right. Whent I click on the link "Email Alerts" in the warning message, it redirects me to Management -> System Management -> Notifications -> Email Settings. I check the setting and test it again. It shows me that it is ok and I receive the testing email. So I save it again, go to the S.M.A.R.T. menu again but there is the same error all the time. Additionally I checked "Send The S.M.A.R.T. Test Result" in Notification -> EventSettings but still the same.
- Management -> Disk Management -> S.M.A.R.T. Test -> S.M.A.R.T. Test:
I can't see the table with the list of hard drives, so I can't check them. It is not possible to create Schedule when the hard drives are not selected. It shows me error message "Please select a hard drive."
How can I set the S.M.A.R.T. check??
2. Management -> System status -> System Info -> Device Information:
Instead of temperature, there is the text "undefined".
Where can I check the temperature??
3. Management -> System status -> Hard Drive Info:
When I click on the Hard Drive Info button, the rotating circle appears and stayed there forever.
Where can I find Hard Drive Info information??
4. When I log in, I must do it two times becouse for the first time, it tells me I have wrong password.
It is not problem for me. I doesn't log in very often and if so, I can live with it.
There are not these issues int the previous version (1.01). When I found out the new version of the firmware doesn't work, I restart the setting to the default values. It doesn't help.
On the other hand, the firmware is noticeably qucker and I can see some additional options, which I appreciate guys. But it is not usable for me the NAS now. I need to set the S.M.A.R.T. check at least. Could you tell me, how to do it? If not I will return it back to the shop. I have it third day and it is not problem to get rid of it.
//edited
-
Simple question:
Is there any How-to-update-firmware?
I couldn't found one...
Thank you.
-
Can other members please validate/replicate these observations?
Thanks!
I'm having the same problems here.
How do i can go back to the previous firmware? i've tried and no change was made
-
Simple question:
Is there any How-to-update-firmware?
I couldn't found one...
Thank you.
DNS ShareCenter - Upgrading ShareCenter Firmware (http://forums.dlink.com/index.php?topic=49100.0)
-
I'm having the same problems here.
You've replicate all four of the bullet points listed by mellda? ???
-
You've replicate all four of the bullet points listed by mellda? ???
i've had the 2,3 and 4 problems. So, i've already removed the firmware before even try to test the nº1 problem listed
-
Before sending this off to D-Link can one additional member please attempt to replicate (I already have the OP and one additional person)
Thanks! ;)
I'm disappointed guys. I intalled the new version but I seems too buggy.
1. I can't plan s.m.a.r.t. check:
- Management -> Disk Management -> S.M.A.R.T. Test -> S.M.A.R.T. Test:
When I check "Send Result By E-mail" it shows me the warning message "Failed Email setting. Please check your setting at System Management -> Email Alerts". But I set it right. Whent I click on the link "Email Alerts" in the warning message, it redirects me to Management -> System Management -> Notifications -> Email Settings. I check the setting and test it again. It shows me that it is ok and I receive the testing email. So I save it again, go to the S.M.A.R.T. menu again but there is the same error all the time. Additionally I checked "Send The S.M.A.R.T. Test Result" in Notification -> EventSettings but still the same.
- Management -> Disk Management -> S.M.A.R.T. Test -> S.M.A.R.T. Test:
I can't see the table with the list of hard drives, so I can't check them. It is not possible to create Schedule when the hard drives are not selected. It shows me error message "Please select a hard drive."
How can I set the S.M.A.R.T. check??
2. Management -> System status -> System Info -> Device Information:
Instead of temperature, there is the text "undefined".
Where can I check the temperature??
3. Management -> System status -> Hard Drive Info:
When I click on the Hard Drive Info button, the rotating circle appears and stayed there forever.
Where can I find Hard Drive Info information??
4. When I log in, I must do it two times becouse for the first time, it tells me I have wrong password.
It is not problem for me. I doesn't log in very often and if so, I can live with it.
There are not these issues int the previous version (1.01). When I found out the new version of the firmware doesn't work, I restart the setting to the default values. It doesn't help.
On the other hand, the firmware is noticeably qucker and I can see some additional options, which I appreciate guys. But it is not usable for me the NAS now. I need to set the S.M.A.R.T. check at least. Could you tell me, how to do it? If not I will return it back to the shop. I have it third day and it is not problem to get rid of it.
//edited
-
DNS ShareCenter - Upgrading ShareCenter Firmware (http://forums.dlink.com/index.php?topic=49100.0)
Thank you, JavaLawyer. Found it, meanwhile. It was far too simple ;)
Anyway: great support. Big THANKS to You!!
-
Thank you, JavaLawyer. Found it, meanwhile. It was far too simple ;)
Anyway: great support. Big THANKS to You!!
Anytime! Glad to help.
-
Did the update to 1.02 (SW-Date: 03/29/2013) and it seems the GUI to be a bit faster.
But I miss the " My Music" -Link, I've seen in a screenshot around here.
Went something wrong or do I need glasses / brain reset?
-
The bugs I described happened to me when I use computer with Windows 7 and the browser Chrome. I tried it again on another computer with Windows XP and the browser Firefox and it worked very well. Then I tried it again with the first computer (W7 + Firefox) and same bugs. I guess it is browser issue - not depending on operating system but I'm not sure. If anyone reproduce these bugs, just try it again with Firefox (or IE). I can confirm issue 2, 3, 4 are ok. When it comes to issue 1, I checked only the list of hard drives. I didn't try to create Schedule with email notification. So I'm sorry guys. You did really good work. The firmware is significantly better. Looking forward to next version.
-
Next problems (THIS works like a charm...):
Updated FW to 1.02, refreshed music library.
- This lasts nearly the whole night. So, the problem with the nearly 100% usage of the CPU isn't solved yet.
You can't do anything with the NAS.
- Not any of my Android devices (all running Android 4.x) will recognice the uPnP content, neither the stock
DLNA player nor Bubble uPnP. Databrowser works fine, but there's no way to use the media via uPnP.
The server is found and shown, but not the content ("No such object") .
Frustrating...
With 1.01 this worked perfect.
So I downloaded the FW 1.01 from the official Website, but I'm not able to install, the system stays under 1.02.
Is there any way to get back the DLNA functionality under 1.02 or to downgrade the system?
-
The bugs I described happened to me when I use computer with Windows 7 and the browser Chrome. I tried it again on another computer with Windows XP and the browser Firefox and it worked very well. Then I tried it again with the first computer (W7 + Firefox) and same bugs. I guess it is browser issue - not depending on operating system but I'm not sure. If anyone reproduce these bugs, just try it again with Firefox (or IE). I can confirm issue 2, 3, 4 are ok. When it comes to issue 1, I checked only the list of hard drives. I didn't try to create Schedule with email notification. So I'm sorry guys. You did really good work. The firmware is significantly better. Looking forward to next version.
I'm glad everything is working for you. The web UI has always been a bit picky when it comes to browser version.
-
Next problems (THIS works like a charm...):
Updated FW to 1.02, refreshed music library.
- This lasts nearly the whole night. So, the problem with the nearly 100% usage of the CPU isn't solved yet.
You can't do anything with the NAS.
- Not any of my Android devices (all running Android 4.x) will recognice the uPnP content, neither the stock
DLNA player nor Bubble uPnP. Databrowser works fine, but there's no way to use the media via uPnP.
The server is found and shown, but not the content ("No such object") .
Frustrating...
With 1.01 this worked perfect.
So I downloaded the FW 1.01 from the official Website, but I'm not able to install, the system stays under 1.02.
Is there any way to get back the DLNA functionality under 1.02 or to downgrade the system?
Did you read this thread: DNS-320L - Firmware v1.02b07 UPnP [FIX] (http://forums.dlink.com/index.php?topic=54300.0)
-
Updated FW to 1.02, refreshed music library.
- This lasts nearly the whole night. So, the problem with the nearly 100% usage of the CPU isn't solved yet.
You can't do anything with the NAS.
Yes, I did.
A second time in the morning, same effect: nothing.
-
Yes, I did.
A second time in the morning, same effect: nothing.
As mentioned in the referenced post (in red), refreshing a large media library can take a very long time. The recommended approach is to refresh a small sub-directory containing a more reasonable number of files, which should demonstrate if/how the solution works for you. From there, you can choose an incremental approach (refreshing a few directories at a time), or doing everything in one shot, which can take a very very long time.
-
Therefore I ran it overnight and while I was out of home.
It's another topic, I think.
Unfortunately, this can't solve my primary problem of the not reachable mediafiles. >:(
Do You have any suggestions?
And: I can't find this "My Music" application...
_____________
Edit:
Next problem: There's no way to add an application to the favourites.
Another one: No way to find the way back to the home from "My Photos"...
_____________
In summary I'd give FW 1.01 a second chance (if I knew, how to downgrade...) or return the DNS and buy another system.
It's unbelievable to me, that a buggy FW like this comes to the users.
Edit N°2: Don't ask me why, the NAS WORKS, the My-Music-Application is shown, the uPnP works.
Workaround: Downgrade on 1.01, full reset the system and update again.
-
Therefore I ran it overnight and while I was out of home.
It's another topic, I think.
. . . .
Edit N°2: Don't ask me why, the NAS WORKS, the My-Music-Application is shown, the uPnP works.
Workaround: Downgrade on 1.01, full reset the system and update again.
I'm glad everything finally worked itself out. ;)
-
I'm too.
Finally I'm shure, this was not the last problem to solve... 8)
______________
Edit:
It seems, I was right withe "next problems to come" prediction.
Copied another bunch of music to the NAS. The copy process was fine, allthough it blocked any other action because of the processor usage.
Looking for the copied songs in the morning I recognized, that they are not in the database.
Do I really have to refresh the database with every single copied file??
This would mean to have a non-reacting NAS for hours, everytime when added one title.
If this is the truth, the DNS-320l is not usable for my purposes.
Anyone around here, who knows something about that case?
Edit 2:
Recognized the problem, that after refreshing the media database a restart is neede to make the NAS visible for other devices.
Anyone around with the same?
-
after upgrading... none of my devices see the media stored on DNS-320L
(previous was ok)
I've focused on my blu-ray player LG BP220 - it's connected to my TV (& played films/photos)
I've tried to refresh, to delete & recreate shares ...many times
nothing helped
Is it any other possibility to reinitilizie DNS without losing accounts & data stored on HDDs?
-
after upgrading... none of my devices see the media stored on DNS-320L
(previous was ok)
I've focused on my blu-ray player LG BP220 - it's connected to my TV (& played films/photos)
I've tried to refresh, to delete & recreate shares ...many times
nothing helped
Is it any other possibility to reinitilizie DNS without losing accounts & data stored on HDDs?
Performing a factory reset will clear all user settings, but should not impact stored data or HDD configuration. You can save a "Configuration File" which will retain all your settings for restoration. Performing a factory reset will retain the current FW version.
** Always create a backup of your data before performing this procedure (although there should be no impact).
-
after upgrading... none of my devices see the media stored on DNS-320L
(previous was ok)
I've focused on my blu-ray player LG BP220 - it's connected to my TV (& played films/photos)
I'll forward this to D-Link...
-
I installed firmware version 1.02. P2P keeps freezing, so nothing changed.. i'm very disappointed, i'v been waiting for half a year for an update but i still cannot use my device what is has been bought for.
-
As far as i noticed the p2p freezing is a bug in the linux that exists on the nas. Somehow the linux random files are currupted or samething like that.
I have SSH access on mine, and the solution was delete the random and urandom nodes, and build them again...But the problem come back, so i have to do it again
-
isnt't there around any newer beta firmware ?
-
isnt't there around any newer beta firmware ?
The latest firmware is version 1.02, also known as v1.02b07 prior to public release.
-
Hi all,
I noticed that v1.02 when I refreshed the uPnP contents only my photos will go through.... If i add a video file folder (contains .MKV .AVI .WMV .MP4) it will freeze at a certain percentage (e.g 15%) throughout and sqldb process will be stuck at 100%. Anyone has similar problems that I am facing? I remembered v1.01 doesn't have this issue. Besides this, all is well with v1.02.
-
Hi all,
I noticed that v1.02 when I refreshed the uPnP contents only my photos will go through.... If i add a video file folder (contains .MKV .AVI .WMV .MP4) it will freeze at a certain percentage (e.g 15%) throughout and sqldb process will be stuck at 100%. Anyone has similar problems that I am facing? I remembered v1.01 doesn't have this issue. Besides this, all is well with v1.02.
Can any other DNS-320L owners validate/replicate this issue?
-
I have this firmware and have my Pi connect up. While I can see the folders and files, I can't play Avi video files. Trying to work out if it's the Pi, Nas or firmware is a pain!
-
As far as i noticed the p2p freezing is a bug in the linux that exists on the nas. Somehow the linux random files are currupted or samething like that.
I have SSH access on mine, and the solution was delete the random and urandom nodes, and build them again...But the problem come back, so i have to do it again
Silly question (Google search starting) but how you do rebuild your random & urandom nodes? And after you delete them and have them rebuilt how long does it take before the problem comes back again? This issue is highly annoying and I really hope someone could alert D-Link to the issue so that it can get some resolution...
-
Hi,
What to say...... Firmwares 1.02bxx are in regression regarding 1.01 for UPNP with Samsung TV and others.
Some correction as been made in the UPNP protocol, with UPNP controller asking for one element NAS but now a new error happen before (in the time).
There is now a mismatch in the UPNP object ID and the nas is no more able to identify it's own identifier!!!!!!!!!!
In firmware 101 the Id looks like file path. example:0/video or 0/movies .....
FIRM102
POST /ContentDirectory/control HTTP/1.1
Accept: */*
User-Agent: SEC_HHP_[TV]UE55ES6100/1.0 DLNADOC/1.50
Host: 192.168.0.4:6000
SOAPACTION: "urn:schemas-upnp-org:service:ContentDirectory:1#Browse"
CONTENT-TYPE: text/xml; charset="utf-8"
Content-Length: 452
Connection: close
<?xml version="1.0" encoding="utf-8"?>
<s:Envelope s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">
<s:Body>
<u:Browse xmlns:u="urn:schemas-upnp-org:service:ContentDirectory:1">
<ObjectID>0</ObjectID>
<BrowseFlag>BrowseDirectChildren</BrowseFlag>
<Filter>*</Filter>
<StartingIndex>0</StartingIndex>
<RequestedCount>30</RequestedCount>
<SortCriteria/>
</u:Browse>
</s:Body>
</s:Envelope>
HTTP/1.1 200 OK
EXT:
CONTENT-TYPE: text/xml; charset="utf-8"
SERVER: POSIX, UPnP/1.0, DNS-320L
Date: Sat, 13 Jul 2013 12:07:23 GMT
Transfer-Encoding: chunked
53E
<?xml version="1.0" encoding="utf-8"?>
<s:Envelope s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">
<s:Body>
<u:BrowseResponse xmlns:u="urn:schemas-upnp-org:service:ContentDirectory:1">
<Result>
<DIDL-Lite xmlns="urn:schemas-upnp-org:metadata-1-0/DIDL-Lite/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:upnp="urn:schemas-upnp-org:metadata-1-0/upnp/" xmlns:dlna="urn:schemas-dlna-org:metadata-1-0/">
<container id="21" parentID="0" restricted="1" childCount="0">
<dc:title>Video</dc:title>
<upnp:class>object.container</upnp:class>
</container>
<container id="22" parentID="0" restricted="1" childCount="0">
<dc:title>Photo</dc:title>
<upnp:class>object.container</upnp:class>
</container>
<container id="23" parentID="0" restricted="1" childCount="0">
<dc:title>Music</dc:title>
<upnp:class>object.container</upnp:class>
</container>
</DIDL-Lite>
</Result>
<NumberReturned>3</NumberReturned>
<TotalMatches>3</TotalMatches>
<UpdateID>0</UpdateID>
</u:BrowseResponse>
</s:Body>
</s:Envelope>
POST /ContentDirectory/control HTTP/1.1
Accept: */*
User-Agent: SEC_HHP_[TV]UE55ES6100/1.0 DLNADOC/1.50
Host: 192.168.0.4:6000
SOAPACTION: "urn:schemas-upnp-org:service:ContentDirectory:1#Browse"
CONTENT-TYPE: text/xml; charset="utf-8"
Content-Length: 452
Connection: close
<?xml version="1.0" encoding="utf-8"?>
<s:Envelope s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">
<s:Body>
<u:Browse xmlns:u="urn:schemas-upnp-org:service:ContentDirectory:1">
<ObjectID>21</ObjectID>
<BrowseFlag>BrowseDirectChildren</BrowseFlag>
<Filter>*</Filter>
<StartingIndex>0</StartingIndex>
<RequestedCount>1</RequestedCount>
<SortCriteria/>
</u:Browse>
</s:Body>
</s:Envelope>
HTTP/1.1 500 Internal Server Error
EXT:
CONTENT-TYPE: text/xml; charset="utf-8"
SERVER: POSIX, UPnP/1.0, DNS-320L
Content-Length: 401
Date: Sat, 13 Jul 2013 12:07:27 GMT
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
<s:Body>
<s:Fault>
<faultcode>s:Client</faultcode>
<faultstring>UPnPError</faultstring>
<detail>
<UPnPError xmlns="urn:schemas-upnp-org:control-1-0">
<errorCode>701</errorCode>
<errorDescription>No such object.</errorDescription>
</UPnPError>
</detail>
</s:Fault>
</s:Body>
</s:Envelope>
-
Hi,
I have also upgraded my DNS-320L to 1.02 fw and I was hoping for a fix to the DLNA compatibility issue with my Samsung smart TV as it is in the fw release notes.
Unfortunately my UE46F6500 still does not see any files on the NAS. (It sees the NAS but none of Video/Music/Photo folders contains any files acc to the TV)
I hope someone can answer these 2 questions:
1) Some of you wrote that they were able to use the SamsungTV-DNS320L combo with fw 1.00 and 1.01. How did you do that? Do you have any hints to make this work? Did you share any specific folders maybe?
2) The only folder I can share is the main volume called Volume_1 with all the content on the NAS (I have this only one option under Account Management/Network Share/Network Shares Settings and also under Application Management/Multimedia Services/Multimedia Shares Settings when I click New or Add). I would like to create a folder named Video, Music or Photo and I hope in this case the TV will find something. Do you know can I create shared folder different than Volume_1?
Thank you for your help in advance!
If these will not work I have to see if funplug and Twonky server can fix the issue or not.
-
management->account management-> network shares -> new
then click on the name "volume_1", not on the square check or the folder icon as it would be logical (dlink interface is terrible), it should open the subfolders, chose which one you want to share and click the check square.
then follow all other options about users, permissions and such.
-
fancontrol script
DNS-320L firmware version 1.02b07
fun plug 0.7
www.sysadminsquare.com/nas/fan-control-d-link-dns-320-with-usb-support/
My modification: https://docs.google.com/file/d/0B-qhdLCeUrnyOUNPZC01R0RIbEU/edit?usp=sharing
It is a shame to have to change things so basic.
-
for peoples that love to live on the edge, on *************** there's 1.03b1 firmware.
use it at your own risk, its beta.
-
Things not working for me (all by connecting as admin to the web interface remotely):
- downloading folders (single file still works) (my folders sections)
- impossible to create pics folder even with very few pictures (will load forever and ultimately, nothing happened)
- can't activate p2p at all
- when I try to save a configuration file, I got a internal servor error (500)
-
for peoples that love to live on the edge, on *************** there's 1.03b1 firmware.
use it at your own risk, its beta.
An official update can't come soon enough for me. Neither the last firmware nor the associated fix for it worked for me, in fact it stopped many key features from working at all so I'm checking every day for something that restores this functionality.
-
Ugh,.... I had version 1.01 on my 320LW, and it was ok. I installed version 1.02b07 and it now :
Refuses to read any folders from my Samsung series 6 tv
Refuses to read any folders from my PS3
The GUI can't be successfully traversed via my ipad
Serious CPU issues
Not sure if this was the same before - but cant play a film with Dolby Digital sound
For me - this renders the whole NAS drive useless. Surely - this is D-Link at an all time low??
Please D-Link - if you actually read this forum (and care about your customers) - sort this out!!!
-
Will there ever be a (more or less) working new firmware or is the DNS-320L already end of life? I'm asking, because a few months ago there was an update for the mydlink iOS App which always shows me a message that a new firmware is available with new functions. Firmware 1.02b07 is already out for a long time but still not working great as seen on several posts on here. ??? Im disappointed, i cannot try out all these nice new features announced with 1.02.
-
Please include:
• Samsung UN40F5500AG [Refuses to read any folders; Not working with FW v1.0, v1.01 and v1.02]
• Samsung UN55F8000AG [Refuses to read any folders; Not working with FW v1.0, v1.01 and v1.02]
Thx
-
after updating the firmware, I have no network access dlna
with my NAS
my blu-ray panasonic bdt-100 could play my media before
What should I do?
-
Hi there, again.
Does anybody know, why my DNS-320l sometimes doesn't start?
Ex. after running down today the NAS didn't start. The Power-LED blinked, but not the HDDs. No reaction.
Reseted: nothing.
Disconnected/reconnected: nothing.
Disconnected and waited for a couple of minutes: nothing.
Same again, waited: works as usual.
I'm confused about this: exactly the same problem comes up intermittet, but there's no pattern.
Any ideas about this?
Regards.
-
Today 1.03b04 has been released, will be public in few days for sure.
Firmware: 1.03
New Features:
- My Surveillance Center
Enhancements:
- Able to press "Enter" to log-in
- Latest log should appear on top of the list at home page
- Add warning message for my music and my photos to inform user to create multimedia library if it is empty
- Support Amazon S3 multiple upload function
- Support new camera models, DCS-931L, DCS-933L, DCS-5010L, DCS-5020L
Problems Resolved:
[Bug Fix] Unable to perform RAID migration from single disk to RAID1 disk volume
[Bug Fix] NAS can't be accessed via the SSL port after SSL port be changed and reboot.
[Bug Fix] Fix the FTP path authentication issue
-
Hi, Folks.
The problem with the not-starting NAS now is a day-by-day thing. >:( >:(
Lucky to get it started I'm in covering my data (the new Synology is waiting for) and then this cra**y thing gets back to the dealer.
My resume: never ever again a D-Link.
Thanks for all Your help, especially Lavalawyer with Your engagement.
The support of D-Link should pay You for this ;-)
Regards an all the best,
itsme.
-
D-Link released firmware version 1.03b04. The download link and comments thread are located here:
DNS-320L - Firmware v1.03b04 Comments & Observations (http://forums.dlink.com/index.php?topic=56378.0).
-
Can any other DNS-320L owners validate/replicate this issue?
also on my DNS-320L same problem. still trying to zip the suspected files but with no better result.
-
LG BP530 blue-Ray player player no dice just hangs when browsing the folder it has the latest firmware and works fine with netgear NAS. DNS-320L firmware version 1.03b04